TDK-Lambda Z320-0.65-U DC Power Supply, Single Output 320V, 0.65A, 208W, Z+ Series

product id: 97402

Category: Power Supplies, DC Power Supplies

Manufacturer: TDK-Lambda

InstruHub is a leading supplier and reseller of TDK-Lambda Power Supplies, DC Power Supplies in UAE, and we ship to all major cities such as Dubai, Abu- Dhabi, Sharjah


High Power Density 200W, 400W, 600W, 800W in 2U (3.5" high) 33 Models ranging from 0-10 VDC to 0-650 VDC output Wide Range Input (85-265 VAC continuous) Active Power Factor Correction (0.99 typical Last-Setting Memory Parallel Operation with Active Current Sharing, for up to six identical units Arbitrary functions and output sequencing Built-in USB, RS-232 & RS-485 Interface Optional LAN, GPIB & Isolated Analog Programming Optional front panel output terminals Optional dual/triple housing for bench use Optional Rack Mount for up to six units (or four units with front terminals) Constant Current or Voltage Modes Five Year Warranty UL Listed for USA and Canada, CE Mark

Z+ Series power supplies are wide output range, high performance switching power supplies. The Z+ Series is power factor corrected and operates from worldwide AC voltage range continuously. Output voltage and current are continuously displayed and LED indicators show the complete operating status of the power supply. The Front Panel controls allow the user to set the output parameters, the protection levels (Over-Voltage protection, Under-Voltage protection and Foldback) and preview the settings. The rear panel includes the necessary connectors to control and monitor the power supply operation by remote analog signals or by the built-in serial communication USB and RS-232/485. LAN, GPIB and Isolated-Analog programming/monitoring are optional.

The Z+ Series power supplies series can be configured into a programmable power system of up to 31 units using the built-in USB or RS-232/RS-485 communication port in the power supply and the RS-485 linking cable provided with each power supply. In a LAN system, each power supply can be controlled using the optional LAN interface (factory installed). In an GPIB system, each power supply can be controlled using the optional GPIB interface (factory installed).

Models are available with optional front panel terminals rated at up to 60V and 24A maximum. Not available on models with over 60V output rating.

Standard models are 1/6 rack width, models with optional front panel terminals, GPIB, or Isolated Analog Interface are 1/4 rack width.

Model Volts
Max (V)
Current
Max (A)
Power
Max (W)
Z10-20-U 10 20 200
Z10-40-U 10 40 400
Z10-60-U 10 60 600
Z10-72-U 10 72 720
Z20-10-U 20 10 200
Z20-20-U 20 20 400
Z20-30-U 20 30 600
Z20-40-U 20 40 800
Z36-6-U 36 6 216
Z36-12-U 36 12 432
Z36-18-U 36 18 648
Z36-24-U 36 24 864
Z60-3.5-U 60 3.5 210
Z60-7-U 60 7 420
Z60-10-U 60 10 600
Z60-14-U 60 14 840
Z100-2-U 100 2 200
Z100-4-U 100 4 400
Z100-6-U 100 6 600
Z100-8-U 100 8 800
Z160-1.3-U 160 1.3 208
Z160-2.6-U 160 2.6 416
Z160-4-U 160 4 640
Z160-5-U 160 5 800
Z320-0.65-U 320 0.65 208
Z320-1.3-U 320 1.3 416
Z320-2-U 320 2 640
Z320-2.5-U 320 2.5 800
Z375-2.2-U 375 2.2 825
Z650-0.32-U 650 0.32 208
Z650-0.64-U 650 0.64 416
Z650-1-U 650 1 650
Z650-1.25-U 650 1.25 812

 

Factory Installed Options (not field installable)
Front panel terminals (60V or 24A max)*  -L
Only one of the options below can be included:
GPIB Interface*  -IEEE
Voltage Programming Isolated Analog Interface*  -IS510
Current Programming Isolated Analog Interface*  -IS420
LAN Interface  -LAN

*Requires wide body (105mm) case style

Part Number Example:
Z10-20-LAN-L-U (includes LAN interface and Front Panel Terminals)


Number of Outputs Single Output
Output Voltage 320V
Output Current 0.65A
Series Z+ Series
Condition New
Mounting Style Bench Top, 2U Rack
Power Rating 208.00W
Input Voltage 85-265VAC
Interface USB,RS-232,RS-485
Phase Single
Programmable Yes

Why Buy from InstruHub:




Similar products

call
phone whatsApp mail