Anritsu MU100021A OTDR Module, 1310/1550/850/1300 nm SMF/MMF, Network Master Series

MU100021A OTDR Module - Network Master Series

The MU100021A is for OTDR measurements of both SM and MM fibers in high demand by the Mobile network I&M

MU100021A OTDR Module:

• Wavelength: 1310/1550 nm ±30 nm, 850/1300 nm ±30 nm
• Fiber Type: Single Mode (SMF) 10/125 µm ITU-T G.652, GI Fiber 62.5/125 µm

Standard Accessories: Universal Connector 2.5 mm for OPM: 1 pc; Universal Connector 1.25 mm for OPM: 1 pc; Quick Reference Guide: 1 pc

Network I&M is supported by installing the MU100020A/MU100021A/MU100022A/MU100023A and MU100010A/MU100011A modules in the MT1000A (Mainframe).

I&M tests of 1.5 Mbps to 100 Gbps communications networks can be executed by simultaneously installing the MU100010A or MU100011A modules. In addition to supporting Ethernet, OTN, etc., networks, Mobile base station CPRI and OBSAI, as well as SyncE protocols are also supported.

Network Master OTDR Series Modules

Generally, depending on the optical fiber measurement environment, OTDR measurements require multiple settings such as distance range, pulse width, measurement time, etc., making work difficult for technicians who do not generally use an OTDR. When performing Pass/Fail evaluation of an optical circuit for a report, a simple intuitive GUI is key to improving work efficiency.

The MU100020A/21A/22A/23A emphasizes easy-to-understand operability using three application measurement modes: OTDR Measurement, (Fiber to the Antenna) FTTA Measurement, and (Optical Loss Test Set) OLTS Measurement.

Scratched or dirty connectors at fiber cable connections can be detected as fault locations from the excessive optical reflections to support fault finding and troubleshooting of Mobile optical networks. Additionally, work efficiency is greatly improved using the Fiber Visualizer function supporting Easy-to-Use/Easy-to-Report testing.

Series Features:

• Easy-to-understand Pass/Fail evaluation using Fiber Visualizer function
• High-accuracy event detection using multi-pulse measurement
• Mobile Fronthaul and Backhaul - Optical Loss, Reflectance and ORL Measurement
• Intuitive manual waveform analysis such as fiber distance, losses and return loss using intuitive operation
• 9 in. high-resolution touch panel (MT1000A Mainframe)
• Supports long-distance fiber evaluation up to 100 km and evaluation of PON systems, such as FTTH including splitter (up to 128 branches)
• Various high-accuracy OTDR measurement functions:
  • 0.8-m Event Dead Zone
  • Up to 250,001 Sampling Points
  • Optical Communications Signal/Connection Check Function
  • Supports Shared OTDR Data Format
  • Macro-bend Detection/Analysis
  • Bi-Directional Measurement
  • Multi-waveform Measurement/Display Functions
• Remote operation functions using VNC connection from PC over Ethernet

Series Interfaces:
Visible Light Source Option, Optical Power Meter, OTDR Single Mode Port 1650 nm (MU100023A), OTDR Multi-mode Port 850/1300 nm (MU100021A), OTDR Single Mode Port 1310/1550 nm (MU1000020A/21A/23A) and 1310/1550/1625 nm (MU100022A)

OTDR Series Specifications:

Light Source:

• Output Power: –5 ±1.5 dBm (CW, 25C)
• Modes of Operation: CW, 270 Hz, 1 kHz, 2 kHz

Common Specs:

• IOR Setting: 1.300000 to 1.700000 (0.000001 steps)
• Units: km, m, kft, ft, mi
• Sampling Points: Up to 250,001
• Sampling Resolution: 0.02, 0.05, 0.1, 0.2, 0.5, 1, 2, 5, 10, 20, 40m
• Loss measurement accuracy (linearity): ±0.05 dB/dB or ±0.1 dB (whichever is greater)
• Reflectance Accuracy: Single mode: ±2 dB, Multi mode: ±4 dB
• Distance Accuracy: ±1 m ±3 x measurement distance x 10⁵ ± marker resolution (excluding IOR uncertainty)
• Distance Range (IOR=1.50000): Single mode: 0.5, 1, 2.5, 5, 1 o, 25, 50, 100, 200, 300 km
  Multi mode: 0.5, 1, 2.5, 5, 10, 25, 50, 100 km
• Fiber Type: Single Mode (SMF) 10/125 µm ITU-T G.652
  Multi mode (MMF) 62.5/125 µm
• Pulse width: Single mode: 3, 10, 20, 50, 100, 200, 500, 1000, 2000, 4000, 10000, 20000 ns
  Multi mode (1300 nm): 3, 10, 20, 50, 100, 200, 500, 1000, 2000, 4000 nm
  Multi mode (850 nm): 3, 10, 20, 50, 100, 200, 500 nm
• Realtime Sweep Time: 10.2 sec. (Test Mode: Manual, Distance Range: 50 km, Resolution: Coarse)