TestEquity Chambers TE-107 Benchtop Temperature Chamber, 0.7 Cu Ft, -42 to 130 C, 120V/60Hz, 1PH

• 0.7 Cu Ft Workspace, 12W x 9H x 11.25D (20 liters)
• -42C to +130C Temperature Range
• Your choice of the NEW F4T Touch Screen Controller or the Original F4 Controller
• High/Low Limit Controller
• 120V Input - Plugs Into Any Outlet Export version available for 230V, 50Hz operation. See Model 107-EX >>
• 3 inch Port on Left and Right Side
• Compact Size for Benchtop or Rack Mount Use
• Low Audible Noise
• Non-CFC Single-Stage Refrigeration
• No LN₂ or CO₂ Required
• Reversible Door
• cTUVus Listed to UL 61010-1 and CSA C22.2 No. 61010-1 (more info...)
• 3 Year Parts, 1 Year Labor Warranty
• Made in the USA

TestEquity GSA Schedule for Environmental Chambers

TestEquity Model 107 temperature chamber is small enough to fit on your bench with plenty of room to spare. It's smaller and uses 33% less power than the typical benchtop chamber. Plus, it fits in a 19in rack. Low audible noise makes the Model 107 ideal for use in confined workspaces. Requiring only 10 Amps at 120 V, you can plug it into any outlet - no need for a dedicated power line. The chamber door is reversible, to open from the left or right side. Two 3in ports let you attach wires to the test sample through the left and right sides. Cools down to -42°C without LN2 or CO2.

Your choice of the NEW F4T Touch Screen Controller or the Original F4 Controller

F4T Touch Screen Controller Modern touch screen interface and connectivity		Original F4 Controller Developed in 1998

NEW F4T Touch Screen Temperature Controller
The F4T is our next-generation controller. Featuring a touch-screen interface, it's exceptionally easy and intuitive to use. Includes RS-232 and Ethernet interfaces. GPIB is available as an option.

More about the F4T Touch Screen Controller >>

Original F4 Temperature Controller
Up to 256 steps can be programmed into as many as 40 nameable profiles. The context sensitive information key and guided steps make profile programming fast and easy. A four-line backlit LCD displays programming, setup, operating and help information. A large LED readout indicates the actual chamber temperature with 0.1° resolution. Internal logic provides refrigeration compressor control for responsive and reliable performance. Includes two alarms and seven event outputs to control remote devices. RS-232C communications is also included. GPIB, Ethernet and analog retransmit are available as options.
More about the Original F4 Temperature Controller >>

High/Low Limit Controller
Provides user-adjustable independent protection against excess temperatures.

	Shown on optional cart.
	Shown in a rack with optional rackmount kit.

Two 3in Access Ports
Two 3in (2.83in inside diameter) access ports are included. Lets you attach wires and sensors to your test sample through both the left and right side of the chamber.

Reversible Chamber Door
You won't need to rearrange you whole bench or workflow to accommodate the Model 107. The chamber door is reversible, allowing the door to open from the left or right side. This is also useful when placing two chambers side-by-side.

Shelf
A stainless steel wire shelf ensures proper airflow around your test sample for uniform temperature distribution.

Compact Size
The TestEquity 107 is designed to use a minimum amount of bench space. Unlike benchtop chambers which take up almost your whole bench, the 107 has a 17 x 25.25 footprint. It can even fit on benches that have a hutch. Plus, it can also fit in a 19in rack. Put it on a cart, and you can roll it into even the smallest work cubicle.

Low-Noise Operation
The chamber's refrigeration system generates a low level of audible noise and vibration. You'll be able to work close to the chamber with minimum discomfort and distraction.

120 Volt Input
Model 107 draws only 10 Amps maximum at 120 Volts. You can plug it into any standard wall receptacle, with plenty of power to spare for other equipment. Compare this to the typical benchtop chamber which draws up to 18 Amps and requires a dedicated line. Export version available for 230V, 50Hz operation. See Model 107-EX >>

Flexible Installation and Maintenence
The condenser airflow is from the front of the chamber to the back. Unlike chambers with side-to-side airflow, you can place Model 107 chambers along side each other. Front-to-back condenser airflow is also important for proper thermal management when the chamber is installed in a rack. And since the condenser grill is removeable from the front, you can clean the condenser without having to take apart your bench setup or removing the chamber from a rack.

World's Best Environmental Chamber Warranty
Only TestEquity offers a 3-year warranty on parts and 1-year warranty on labor. Our nationwide service network is qualified to do the job right. And we always have replacement parts in stock for immediate shipment. Labor warranty applies to the United States and Canada only. See the complete warranty statement here.