Tripp Lite PV2400FC 2400W PowerVerter Plus Industrial-Strength Inverter with 2 Outlets

• Designed for heavy duty and motor loads
• 24V DC input; 120V AC output; 2 outlets
• 2400W continuous output
• Peak surge output: OverPower (up to 1 hour)—3600W; Double-Boost (up to 10 seconds)—4800W
• High-efficiency power conversion
• Automatic overload protection

Continuously supplies up to 2400W of 120V AC power to 2 AC outlets from any 24V battery or automotive DC source. Frequency control locks AC output at 60Hz for operating stability of motor loads. Includes a set of high current DC input terminals for simple, permanent installation. Highly reliable large transformer design specializes in powering motors and other inductive loads with high-current startup needs. NOTE: To protect against high current draw that may occur during inverter failure, a fuse link rated at 250a should be positioned no more than 18" from the PV2400FC's battery in the positive line.

•Converts 24V DC battery power to 120V AC power
•2400W continuous output power
•Peak surge output: OverPower (up to 1 hour), 3600 watts; Double-Boost (up to 10 seconds), 4800W
•Set of 2 bolt-down DC wiring terminals for 24V battery connection; 2 x NEMA 5-15/20R outlets
•Frequency control for operating stability
•High-efficiency operation conserves batteries to prolong run time
•Diagnostic LEDs indicate load level (high, medium, and low) and battery charge (high, medium, and low)
•DC fusing protects inverter against overload
•High-impact polycarbonate housing
•RJ45 port allows connection of APS/PowerVerter Remote Switch (APSRM4)