Category: Electrical Calibrators

Manufacturer: Dwyer Instruments

Dwyer CSG Signal Generator

product id: 103660

Category: Electrical Calibrators

Manufacturer: Dwyer Instruments

InstruHub is a leading supplier and reseller of Dwyer Instruments Electrical Calibrators in UAE, and we ship to all major cities such as Dubai, Abu- Dhabi, Sharjah

Features

Impedance
- Voltage: 1000Ω min
- Current: 300Ω max
Output: 0 to 20 mA (1 mA increments); 0-10 VDC (1 VDC increments)
Resolution:1 mA (current); 1 VDC (voltage)
Large Backlit Display
Timed Ramp Function
Process Display Configuration
Transmitter Calibration
Ramping Time Intervals: 1 to 20 sec (1 sec increments)
Auto Power Off
9 V alkaline battery, user replaceable or 120 VAC
Electrical Connections: 6 ft (1.8 m) with alligator clips

What's in the Box

Test leads with alligator clips
9 V alkaline battery
120 VAC plug-in power supply
Carrying case
Instruction manual

The Dwyer CSG current and voltage signal generator is an ideal tool for troubleshooting transmitters, transducers, motors, and actuators. The unit generates a 0 to 10 VDC signal in increments of 1 volt or a 0 to 20 mA signal in increments of 1 mA. The Model CSG features a large LCD display with a blue backlight for use in dimly lit areas. The Model CSG continuously ramps the output using user selected minimum, maximum, and ramp interval timing parameters.

Kanomax 6820 Series Digital Anemometer

Rotating vane digital anemometer measuring air velocity, air temperature, and relative humidity.

Kanomax Anemomaster 6036 Anemometer

Multi-function hot-wire anemometer with telescopic, articulating probe and data logging.

E+E EE650 Air Velocity Transmitter

Hot film sensor technology, ranges up to 4000 ft/min (20 m/s), high resistance to pollution.

Kanomax Climomaster 6501 Series Anemometer

Hot-wire anemometer compatible with detachable probes, for measuring air velocity, air temperature, humidity, flow rate, and pressure.

Extech AN100/AN200 CFM Thermo-Anemometer

Measures airflow or air velocity, and temperatures to 500°F with infrared thermometer.

E+E EE75 Air / Gas Velocity Transmitter

Hot film sensor, high precision, measures velocities up to 8000ft/min (40m/s), high accuracy, designed for industrial applications.

Kanomax 6006 Anemomaster LITE Anemometer

Palm-size and feather-weight standard hot-wire anemometer.

Testo 405i Hot Wire Anemometer

Smart probe that measures air velocity, volume flow, and temperature and transmits data via Bluetooth to an App on your smart device.

E+E EE872 CO2 / RH / Temp / Pressure Probe

Modular 4 in 1 probe for CO2, humidity, temperature and pressure, dual wavelength NDIR CO2 measuring principle.

RKI Instruments RI-600 Carbon Dioxide Monitor

Stand alone CO2 monitor with NDIR sensor.

Dwyer CDT Carbon Dioxide & Temperature Transmitter

NDIR CO2 Sensor, Universal Outputs, accurately monitor the CO2 concentration and temperature in indoor environments.

E+E EE820 CO2 Transmitter

Dual wavelength non-dispersive infrared technology (NDIR), auto calibration, ranges up to 10000 ppm.

Telaire T8000-R Series CO2 Monitor

Low cost, high performing CO2 transmitter with relay for the building controls and indoor growers markets.

Telaire T3000 Series CO2 Sensor

Non-dispersive infrared (NDIR) technology offering ranges up to 20,000 ppm with a 10 year life span.

Telaire Ventostat Series CO2 Monitor

Commercial grade Carbon dioxide detectors for ventilation control and air quality applications.

Dwyer CDWP Series Carbon Dioxide Transmitter

NDIR sensor housed in IP54 die cast aluminum available with sensor ranges of 2,000, 5,000 and 10,000ppm.

Fluke 376 FC True RMS AC/DC Clamp Meter

Fluke connect compatible logging clamp meter that measures 1000V, 1000A and resistances up to 60kΩ.

Yokogawa CL420 Clamp On Process Meter

Measures 4 to 20mA DC signals without breaking the loop, 0.2% accuracy, dual display.

Fluke 393 FC True RMS CAT III 1500V Clamp Meter

Fluke Connect compatible IP54 rated clamp meter that measures up to 1500VDC and 1000VAC.

Fluke 381 True RMS AC/DC Clamp Meter

Detachable, remote display and iFlex flexible current probe for easier, faster and safer measurements.

Fluke 355 & 353 Clamp Meters

True RMS meters with extra-wide jaws suitable for high-current measurements up to 2000A.

Fluke 771 Milliamp Process Clamp Meter

Measures 4-20mA signals without breaking the loop.

AEMC K100 & K110 DC/AC MicroProbes

Acurate AC/DC current measurement of very low currents with 50μAdc sensitivity.

Extech EX830 Clamp Meter & IR Thermometer

1000A clamp True RMS meter with built-in non-contact infrared thermometer and type-K temperature measurement.

Bacharach Fyrite InTech Combustion Analyzer

Direct measurement of O₂ as well as stack and ambient temperature with CO measurement optional.

Bacharach PCA400 Portable Combustion Analyzer

Measures and displays flue gas oxygen, carbon monoxide, stack temperature, combustion air temperature, draft and differential pressure.

Bacharach Fyrite INSIGHT Plus Combustion Analyzer

Combustion and efficiency analyzer includes innovative Tune-Rite software and long-life O₂ sensor.

Bacharach ECA 450 Environmental Analyzer

Measures and displays O2 and CO in the flue gas, pressure (draft), primary air temperature, and stack temperature.

Rosemount Analytical 6888 Xi Electronics

Xi advanced electronics for zirconium oxide oxygen probes.

Testo 330i Flue Gas Analyzer

Combines proven measuring technology with remote measurement capability and wireless control.

Michell Instruments XZR500 Combustion Control Analyzer

Measures oxygen levels in combustion processes and flue gases to help maintain the optimum level of combustion efficiency.

Rosemount Analytical Xi Advanced Electronics