Intempco Model LTX60 Level Transmitter

product id: 104922

Category: Level Instruments

Manufacturer: Intempco

InstruHub is a leading supplier and reseller of Intempco Level Instruments in Tanzania , and we ship to all major cities such as Dar es Salaam


Features

  • Continuous loop-powered 4-20mA operation
  • Remote DIN Rail mounted transmitter, up to 1000ft away
  • Hermetically sealed, vibration resistant construction
  • 1/2" NPT thread standard
  • Internal probe PFA clad or Stainless 316 bare
  • Probe lengths up to 36 inch maximum
  • Cable extension or M12 connector
  • Accuracy 1% of span for same dielectric
  • Cable lengths up to 999 ft maximum

The Intempco Model LTX60 Level Transmitter are one of the most compact, vibration resistant RF level transmitters ever made available to the industry. They feature one-piece tubular design, welded 3/4" NPT fitting and a concentric internal PFA clad probe. Remote electronics are potted into the tube portion above the fitting. DIN Rail mounted transmitter can be installed up to a 1000 feet away from the process where calibration can be performed. The microprocessor-based electronics convert frequency change, detected by the probe, into a linear, highly accurate 4-20 mA signal. This compact design makes installation and setup a simple task. The advanced signal conditioning circuitry greatly minimizes the adverse affects of poor dialectric and material coating on the probe.

LTX60 RF transmitters can be used in metallic and non-metallic tanks, stationary or mobile equipment. Ideal for small tanks of all types, they can be used in virtually any liquid, conductive or non-conductive. One ideal application is measuremnt of fuel and oil level of tanks in mobile equipment. Compact, rugged and hermetically sealed construction of LTX60 series sensors cannot be beat in performance.

Applications for the LTX60 include:

  • Diesel fuels, other fuels and oils in metallic or non-metallic tanks
  • Water based liquids in metallic or non-metallic tanks
  • Acids compatible with Stainless 316 and PFA Teflon in metallic or non-metallic tanks
  • MEK and other solvents
  • Chemical holding tanks, metallic or non-metallic
  • Measurement of liquid levels in mobile equipment
  • On-site calibration may be required
  • Not recommended where material dielectric varies due to change of temperature or pressure

Why Buy from InstruHub:




Similar products

call
phone whatsApp mail