Pico Technology TA300 Current Probe, 40 A AC/DC, D9 Connector, For PicoScope 4444

TA300 AC/DC Current Probe

Specs:

• Nominal current: 40 A AC peak or DC
• Measuring range(s): 40 A
• Overload capacity: 500 A (60 s)
• Output sensitivity: 100 mV/A
• Frequency range: DC to 100 kHz (0.5 dB)
• Power supply: 5 V nominal from PicoScope 4444
• Overvoltage category: 300 V CAT III
• Load impedance (minimum): > 100 kiloohm and ≤ 100 pF
• Conductor size: 25 mm diameter
• Output cable and connectors: 2 m long screened cable terminated with D9 plug

The TA300 is a 100 kHz bandwidth, single-range 40 A AC or DC current probe using the D9 connector specific to the PicoScope 4444 differential oscilloscope. On connection with the scope, the probe is instantly sensed and the vertical range automatically set up in PicoScope software. The probe is also powered by the scope through the D9 connector.

Note: When using the PicoScope 4444 with USB power (no AC adaptor connected), sensor power is limited to a maximum of 3 x TA300 probes at once.