Category: Vibration Monitoring

Manufacturer: Bently Nevada



Bently Nevada 3500/44M Aeroderivitive GT Vibration Monitor

product id: 106111

Category: Vibration Monitoring

Manufacturer: Bently Nevada

InstruHub is a leading supplier and reseller of Bently Nevada Vibration Monitoring in Saudi Arabia, and we ship to all major cities such as Riyadh, Jeddah & Dammam


Features

  • Accepts from 1 to 4 pressure transducer signals
  • Input impedance:
    • 3 wire: transducer 10 kΩ
    • 2 wire: 1.5 MΩ to 3.5 MΩ typical
  • Dynamic pressure: 100 mV/psi (1.45 mV/mBar)
  • Front panel LEDs: OK, TX/RX, Bypass
  • High mode and low modes available
  • Programmable alarm time delays


The Bently Nevada 3500/64M Dynamic Monitor is a single slot, four channel monitor that accepts input from high temperature pressure transducers and uses this input to drive alarms. The monitor's one measured variable per channel is band pass dynamic pressure.

The 3500 Rack Configuration Software configures the band pass corner frequencies along with an additional notch filter. The monitor provides a recorder output for control system applications. The primary purpose of the 3500/64M Dynamic Pressure Monitor is to provide the following:

  • Machinery protection by continuously comparing monitored parameters against configured alarm setpoints to drive alarms
  • Essential machine information for operations and maintenance personnel

Why Buy from InstruHub:




Similar products

Inertial Sensors Proximity Sensors Vibration Monitoring
Bently Nevada 200350 / 200355 Accelerometers

Bently Nevada 200350 / 200355 Accelerometers

Proximitor sensor with a probe housing to create a compact, self-contained, all-in-one proximity probe system.


More
Bently Nevada 330400 / 330425 Accelerometer

Bently Nevada 330400 / 330425 Accelerometer

General purpose, wide frequency, case-mounted seismic transducers, hermetically sealed, stainless steel case.


More
Bently Nevada 20015x Series Accelerometers

Bently Nevada 20015x Series Accelerometers

General purpose, wide frequency, case-mounted seismic transducers, hermetically sealed, stainless steel case.


More
Bently Nevada PROXPAC XL Proximity Transducer Assembly

Bently Nevada PROXPAC XL Proximity Transducer Assembly

8mm probe, polyphenylene sulfide probe tip material, part of the 3300 XL Proximity Transducer System.


More
Bently Nevada 177230 Seismic Transmitter

Bently Nevada 177230 Seismic Transmitter

Provides a 4-20 mA signal proportional to the 0-1 inch/sec 0-pk velocity movement of a roller element bearing housing or machinery housing.


More
Bently Nevada 2300 Series Vibration Monitor

Bently Nevada 2300 Series Vibration Monitor

Continuous monitoring and protection, self-contained, compact, stand-alone vibration monitoring.


More
Bently Nevada Ranger Pro Vibration Sensor

Bently Nevada Ranger Pro Vibration Sensor

Wireless vibration sensor for cost effective data collection and condition monitoring analysis.


More
Bently Nevada Model 9100D Shaker Table

Bently Nevada Model 9100D Shaker Table

Portable shaker table, 7 to 10 kHz frequency range, industrial pelican storm case, NIST traceable transducer.


More
Bently Nevada RK4 Rotor Kit

Bently Nevada RK4 Rotor Kit

Benchtop rotating machine that simulates a number of machinery malfunctions .


More
Bently Nevada 3500/33 Relay Module

Bently Nevada 3500/33 Relay Module

16-Channel Relay Module, independently programmed to perform voting logic.


More
Bently Nevada 3500/50M Tachometer Module

Bently Nevada 3500/50M Tachometer Module

Accepts up to two transducer signals from proximity probe transducers or magnetic pickups.


More
Bently Nevada 330750 / 330752 Velomitor

Bently Nevada 330750 / 330752 Velomitor

5.7mV/mm/s (145mV/in/s) ±5% sensitivity, sensing head can be mounted on surfaces with temps as high as (752°F).


More
call
phone whatsApp mail