product id: 68439
The i30 and i30s current clamps are based on Hall Effect technology for use in measurement of both DC and AC current. They may be used in conjunction with multimeters, ScopeMeters, recorders and other suitable recording instruments for accurate non-intrusive current measurement.
 |
| i30 connected to a Fluke 87V Digital Multimeter |
| Electrical Specifications | i30 | i30s |
|---|---|---|
| Specified current range | 30 mA to 30A dc, 30 mA to 20 A ac rms | |
| Usable current range | 5 mA to 30 A dc, 30 mA to 20 A ac rms | |
| Output sensitivity | 100 mV/A | |
| Accuracy (at +25 °C) | ± 1 % of reading ± 2 mA | |
| Resolution | ± 1 mA | |
| Load impedance | > 10 k Ohms and ≤ 100pF | > 100 kΩ |
| Frequency range | DC to 20 kHz (- 0.5 dB) | DC to 100 kHz (- 0.5 dB) |
| General Specifications | i30 | i30s |
| Maximum conductor size | 19 mm diameter | |
| Output connection | 4 mm safety connector | Safety BNC connector, supplied w/safety 4 mm adapter |
| Cable length | 1.5 meters | 2 meters |
| Operating temperature range | 0 °C to +50 °C | |
Please refer to Data Sheets for complete specifications.
| Condition |
Why Buy from InstruHub:
Similar products
