Instek PPX-1005 High-Precision Programmable DC Power Supply, 50W, 10V/5A, PPX Series

Features:

• CV, CC priority start function
• Four levels of current measurement resolution (min. 0.1µA) / two levels of voltage measurement resolution (min. 0.1mV)
• Power output ON/OFF delay function
• Adjustable voltage and current slew rate
• Bleeder circuit control
• Delayed over-current protection (OCP Delay)
• Sequential power output function
• Remote Sensing function
• Data Logger
• 10 sets of memory function
• Over voltage protection, under voltage limit, over current protection, over temperature protection, AC alarm function
• Supports K Type thermocouple temperature measurement
• Interfaces: USB, LAN, RS-232, RS-485, Analog Control; Opt: GPIB
• Size: 3U high, in line with 1/4 Rack
• Multiple Unit Connection - up to 31 units via RS-485 Cables (GTL-260 / GTL-262)

The PPX-1005, a PPX series model, has the output low noise (0.35mVrms) and fast transient response characteristics (<50µs) of conventional linear power supplies.

It also provides constant voltage and current priority output modes, plus the series can also set the voltage and current rising/falling slew rates separately. In addition, the delay time for the output can be turned on and off.

Users can be provided with high-precision measurements from four current levels and two voltage levels. Those measurement records, via the Data Logger function, can be stored in the USB for long-term measurement and recording of IoT devices, portable devices, wearable devices, and sensor components.