Chroma 62010L-36-7 DC Power Supply

product id: 66045

Category: Power Supplies, DC Power Supplies

Manufacturer: Chroma

InstruHub is a leading supplier and reseller of Chroma Power Supplies, DC Power Supplies in Russia, and we ship to all major cities such as Moscow


  • 0 to 36 V, 0 to 7 A, 108 Watts maximum*
  • Wide range of voltage & current combinations in constant power
  • Low noise: < 3mVp-p
  • Fast transient response time: < 50μs
  • High-speed programming
  • Precision V&I measurements
  • Standard GPIB/USB interface
  • Remote sense
  • Master-slave parallel and serial control
  • 8 steps for auto sequencing programming
  • 16 storage locations for user-defined operating states
  • OVP, Current limit, Thermal protection
  • CE Certified
*Note: The power rating determines the maximum available current for a given voltage output. The 62010L-36-7 is rated at 36 V, 7 A, or 108 W, but you cannot get 36 V and 7 A simultaneously. The maximum current at 36 V is 3 A (36 V x 3 A = 108 W).

Lightweight and Versatile
The Chroma 62010L-36-7 Programmable DC power supply has low noise linear performance and fast transient response. The GPIB and USB control interfaces come standard — no additional purchase required. The 62010L-36-7 can be remotely-controlled easily via either of these two interfaces.

Autoranging Output
For wide range voltage and current applications, one 62010L-36-7 DC power supply can be used to test the input of both low voltage/high current and high voltage/low current UUTs. The output specification 108W/60V/7A can operate under different combinations.

Master-Slave Control
The 62010L-36-7 master-slave control has 4 modes:

  • Parallel Mode:
    The master-slave parallel control connects multiple power supplies to extend the current output. Max 7 units, output current 0-49A.
  • Series Mode:
    The master-slave parallel control connects multiple power supplies to extend the voltage output. Max 7 units, output voltage 0-252V.
  • Normal mode:
    The master-slave normal control follows the delay time set by each power supply to output from the master.
  • Track Mode:
    The master-slave track mode tracks each power supply to synchronize with the output voltage and status of master.
Chroma 62000L Master Slave

Chroma 62000L Master Slave

High Transient Response
The 62000L Series features state-of-the-art DC power supply design with high transient response for output voltage. When the output current changes from 3.5 A to 7 A at the speed of 1A/μs, the voltage change of actual output can return to 15 mV within 10.1μs.For dynamic load change, the 62010L-36-7 can quickly react in order to give a stable DC output, as well as reducing the surge voltage generated by load change that could damage the UUT. As to non-static products or test applications, the 62010L-36-7 can timely provide a stable DC power supply.

Low Output Noise
The 62000L Series provides pure and stable DC power. For example, the 62010L-36-7 output voltage noise is 1.18mVp-p (20 –20 MHz) under the maximum rated current and maximum output power.For precision products that require strict power quality, such as semiconductor testing and IC drive, the power supply is able to comply with the product specification to protect the UUT from the interference of heavy noise providing low ripple and low noise input power with pure quality.

Auto Sequencing Programming The auto sequencing programming function built into the 62000L Series allows you to define and edit the output waveforms and cycles desired. Using eight steps per cycle, each step can set the time for voltage to rise or fall as well as to dwell. This function can also be applied to the waveform signal simulation test of power electronics and the power simulation test of automotive electronics by editing the required output voltages following the UUT test criteria.

Portable, lightweight benchtop DC power supply
With many unique functions targeted for overall automated test system integration, automotive power electronics MCU/ECU, power semiconductors and wireless communications, the 62010L-36-7 provides high quality yet cost-effective programmable benchtop DC power, designed to meet the stringent requirements of the next generation of power electronics. The Chroma 62000L Programmable Power Supplies have applications in laboratory and system integration, automotive electronic components, university and 3C products, mobile, IC driving power, wireless and communication power and low-noise for aircraft applications.


Condition New

Why Buy from InstruHub:




Similar products

call
phone whatsApp mail