Chroma 19035 Wound Component Scanner

product id: 66057

Category: Other Instruments, Hipot, Electrical Safety

Manufacturer: Chroma

InstruHub is a leading supplier and reseller of Chroma Other Instruments, Hipot, Electrical Safety in Russia, and we ship to all major cities such as Moscow


Wound Component EST Scanner

  • Replacement for QuadTech Hybrid 2000
  • AC: 0.05 - 5KV, DC: 0.05 - 6kV
  • SUB-STEP Function
  • Open / Short Check (OSC)
  • GFI Human Protection
  • Flashover Detection
  • Key Lock Function
  • RS-232 Interface (standard)
  • Optional GPIB and Handler Interface (instead of RS-232)
  • CE Mark

Wound Component Testing Solution
The Chroma 19035 Wound Component EST Scanner is a production safety tester designed for test requirements of three-phase motors, double-wound transformers and heater related wound components. Quality verification test items for wound components consist of AC/DC Hipot (dielectric withstanding), Insulation Resistance (IR), and Impulse Winding tests. Chroma has integrated these tests into one unit.

The 19035 Series supports 5 kVac and 6 kVdc high voltage output to conform with withstand test requirement for wound components, its maximum output current can up to 30 mA. Insulation Resistance (IR) test measurement range is 1MΩ to 50GΩ with up to 5 kV test voltage. DCR can measure basic specification for wound components and also check the connection before safety withstand testing.

The 19035 Series also includes powerful functions such as Flashover detection and Open/Short Check (OSC) as well as programmable voltage, time parameters, etc. for various DUTs features to promote testing reliability and product quality.

Applications
The 19035 is a comprehensive safety tester designed for motor, transformer, heater related wound component requirements. Most of wound components are equipped with multiple winding such as 3-phase motor, dual winding transformer, etc. Moreover, the wound component needs to use Impulse Winding Tester for high voltage winding to check insulation no good of winding device.

The 19035 design is for connecting a DWX Series — Impulse Winding Tester directly and using the 19035 8-Channel scanning to reach multiple points completion in one test, instead of switching test points manually — saving test time and human cost.

The 19035 provides OSC and DCR functions to verify if a bad contact or a short circuit has happened during the testing procedure. It solves the Wound Components of motor, transformer, etc. contact problems, so that test quality is greatly enhanced; and the life of test device prolonged.
  • Motor, Fan: 19035-M / 19035-ML
  • Electric Heater Tube : 19035-M / 19035-ML
  • Transformer: 19035 / 19035-L
  • Switch, Wire: 19035 / 19035L
  • Camera Micro Motor, Coil: 19035-S

Condition New

Why Buy from InstruHub:




Similar products

call
phone whatsApp mail