product id: 101867
The SUPDMB568HW hardwire input/output PDU module converts compatible SmartOnline Hot-Swappable Modular UPS Systems (models SU5000RT4U, SU6000RT4U, and SU8000RT4U) to a totally hardwired solution. Easy quick-connect terminal block allows installation of hardwire distribution module in minutes. Can accept input voltages of 120/208 or 120/240 VAC split-phase power. Detachable hardwire module with manual bypass switch allows for effortless UPS maintenance without the need to power down connected loads and re-wire input/output connections.
•True on-line, double-conversion UPS provides constant, pure sine wave AC output
•Maintains continuous operation with zero transfer time through blackouts, brownouts, voltage fluctuations and surges
•Removes harmonic distortion, electrical impulses, frequency variations and other hard-to-solve power problems
•Accepts input voltages between 80-150V (65-150V at loads under 70%), regulating output to 120V AC +/-2%
•750VA/600W output capacity with 6 x NEMA5-15R outlets
•Two built-in individually switchable load banks can be controlled via software interface to selectively reboot remote equipment or shed less critical loads to extend battery runtime for the most critical equipment (1 outlet per bank)
•Standard internal battery set provides 11 min. runtime at half load and 4 min. at full load
•Extended runtime available with optional BP24V15RT2U, BP24V28-2U, or BP24V70-3U external battery packs
• Intelligent battery management system extends battery life
•Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual)
•HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
•DB9 serial network interface supports RS-232 and contact closure messaging
• Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX, SNMPWEBCARD, MODBUSCARD and RELAYIOCARD
• USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from www.tripplite.com/poweralert
•Compatible with Tripp Lite's WatchDog service monitoring/rebooting software (part# WATCHDOGSW)
•Fault tolerant electronic bypass maintains utility output during a variety of UPS fault conditions
•Diagnostic LEDs
•Upright tower format; attractive all-black color scheme
•$250,000 Ultimate Lifetime Insurance (U.S., Canada, and Puerto Rico only)
Includes | |
Note | |
Warranty Information |
Why Buy from InstruHub: