Tektronix CT2 High Frequency Current Probe, 200 MHz

• High Bandwidth, 1.2 kHz to 200 MHz
• Max Peak Pulse 36A, Max Continuous RMS, 2.5 A,
• Max bare wire #16 AWG, 1.32mm (0.052 in)
• Ultra-low Inductance
• Very Small Form Factor
• Characterize Current Waveforms up to 500 pSec Rise Times
• Very Low Loading of Circuit Under Test
• Fits Into Dense, Closely-spaced Circuit Designs

The CT1 and CT2 Current Probes are designed for permanent or semi-permanent in-circuit installation. Each probe consists of a current transformer and an interconnecting cable. The current transformers have a small hole through which a current carrying conductor is passed during circuit assembly.

The P6041 Probe Cable provides the connection between the CT1 and CT2 Current Transformers and a BNC oscilloscope input. A 50 Ω termination is required to terminate the cable when connected to a high impedance (1 MΩ) oscilloscope input. One probe cable can be used to monitor several current transformers that have been wired into a circuit.

Includes Manual and P6041 Interconnect Cable.