U8480 Series USB thermocouple power sensors come with a measurement speed of 900 readings/second and power linearity of less than 0.8%, providing high accuracy and stability to help you make average power measurements quickly and confidently. With the U8480 Series USB sensors, one of the most cost-effective solutions in Keysight’s power meter and sensor portfolio, you get top performance features at costs so affordable that every engineer can carry one in their bags. This series is also available with Option 200 for meaurments down to DC.
Built-in external trigger in
External trigger will enable accurate trigger of small signals close to the signal noise floor. With the built-in trigger in connection on the U8480-series power sensors; you can connect an external trigger signal from a signal source or the device under test directly to the USB sensor through a standard BNC to SMB cable.
Internal calibration
Save time and reduce measurement uncertainty with the internal calibration function. These sensors come with technology that integrates a DC reference source and switching circuits into the body of the sensor so you can calibrate the sensor while it is connected to a device-under-test. This feature removes the need for connection and disconnection from an external calibration source, speeding up testing and reducing connector wear and tear. To perform zeroing, simply turn off the device-under-test.
Legacy excellence in a compact and portable form factor
The U8480 Series is based on the same front end design as the Keysight 8480 and N8480 Series power sensors, now equipped with USB capabilities and improved specifications such as a measurement speed ten times faster than the legacy series.
The U8480 Series plugs directly into your PC or USB-enabled Keysight instrument and gives you the capability to measure power without needing an external power meter or power supply. The sensors draw power directly from a USB port and do not need additional triggering modules to operate.
Measurements direct from your PC
The U8480 series is supported by the Keysight BenchVue software. BenchVue makes it easy to control your power meter to log data and visualize measurements in a wide array of display options without any programming. Simply connect the sensor to your PC installed BenchVue BV0007B Power Meter/Sensor Control and Analysis app to perform average power measurement and analysis.
Includes:
5-1/2 Digit Dual Display DMM
30W DC Source
Additional Features
Convenient and Full Featured. One-box source-and-measure device.
The U3606B multimeter | power supply combines a full featured 5.5 digit digital multimeter with a 30 Watt DC power supply in a single, compact unit. Hence it is capable of powering up your device under test (DUT) while you measure voltage or current etc. at the same time. This convenient 2-in-1 concept is space- and cost-efficient.
U3606B is an improved version of U3606A with 2 newly added power range improvements such as better resolutions, broader ripple noise frequency specification, as well as better transient response and voltage programming time.
You can easily connect the U3606B dual-purpose hybrid meter to your PC/laptop via USB or GPIB connectivity and control it remotely with Standard Commands for Programmable Instruments (SCPI). The U3606B is ideal for tests such as sensor validation, electronic component tests and circuit board functional tests. Its key capabilities include sweep function (ramp and scan), low resistance measurement, and square wave output with selectable frequencies of up to 4.8 kHz.
Includes: quick start guide, product reference CD, Keysight IO libraries suite, USB 2.0 High-Speed Type-A to Type-B cable, U8201A combo test lead kit, power cord, calibration certificate.
