- 53220A/010 includes Opt. 010 Ultra High-stability OCXO Timebase
- 350 MHz baseband frequency
- OPTIONAL: 6 or 15 GHz microwave channels
- Up to 12 digits/sec
- 100 ps single-shot time resolution
- Up to 75,000 and 90,000 readings/sec (frequency and time interval)
- Frequency, period, frequency
ratio, max/min/peak-to-peak input
voltage, time interval, single period,
pulse width, rise/fall time, duty
cycle, phase, totalize
- Datalog trend plot
- Cumulative histogram
- Built-in math analysis and statistics
- 1M reading memory and USB Flash storage
- LXI-C/Ethernet LAN, USB, GPIB
- Optional battery for portability and timebase accuracy
- A BenchVue software license (BV0011B) is now included with your instrument. BenchVue makes it simple to connect, control instruments, and automate test sequences.
You need to make accurate time and frequency measurements and you need
to do it fast. Next-generation Keysight 53200 Series counters provide the
performance you need, along with important extras that may surprise you.
You get more than higher performance. You get insight.
What makes the 53200 Series counters better than anything you’ve used
before? Here are a few of the improvements and new capabilities:
- More frequency: 350 MHz baseband frequency, OPTIONAL 6- or 15-GHz microwave channels
- More resolution: Up to 12 digits/sec and 100-ps single-shot
time interval
- More information accessibility: 1M reading memory,
up to 75,000 frequency readings/sec, strip chart/trend plot,
cumulative histograms
- More connectivity: First LXI-compliant counters
(LXI/Ethernet, USB, and GPIB connectivity)
Get all this capability along with full compatibility with the previous
generation of 531xxA counters.
Includes documentation on CD, Keysight IO Library, power cord, USB cable, calibration certificate. Three-year warranty.
346A/100 includes APC 3.5 (male) connector
- Frequency range: 10 MHz to 18 GHz
- Nominal ENR 6 dB
- VSWR: < 1.3:1
- Connectors: BNC (f) input bias / 3.5 mm (m)
- Low SWR for reducing noise figure measurement uncertainty
- Individually calibrated ENR values at specific frequencies
Keysight 346A noise source is the ideal companion to Keysight’s noise figure solutions. Since it is broadband (10 MHz to 18 GHz), it eliminates the necessity for several sources at different frequency bands. The low SWR of the noise source reduces a major source of measurement uncertainty; reflections of test signals. The very small change in reflection coefficient (<0.01) from ON to OFF is designed especially for accurate characterization of input-impedance-sensitive devices (like GaAsFETs and many UHF amplifiers).
