Tripp Lite SM1000RM2UTAA TAA SmartPro 120V 1kVA 800W Line-Interactive Sine Wave UPS, 2U Rack/Tower, Network Card Options, LCD, USB, 6 Outlets

• Corrects under- and overvoltages from 83V to 147V
• 6 NEMA 5-15R outlets—4 switchable via network interface
• Network power management and control capability
• Interactive LCD monitoring screen
• 15 min. runtime at half load; 5.3 min. at full load
• To use the Auto Probe feature, this product requires a WEBCARDLX network interface (sold separately) running LX firmware update 15.5.2 or later

Protects connected mission-critical equipment against damage, downtime and data loss due to blackouts, brownouts, power surges and line noise. Ideal solution for servers, storage devices and telecom hardware.
Protects Mission-Critical Rack-Mounted Equipment
•Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
•Audible alarm signals loss of utility power, overload, low battery and fault conditions
•6 NEMA 5-15R outlets
•10-ft. (3.05 m) power cord with 120V NEMA 5-15P input
•570-joule surge suppression rating Reliable Battery Backup
•Supports half load up to 15 min. and full load up to 5.3 min.
•Internal batteries designed for hot-swap field replacement
•95% line-power efficiency rating saves money in energy costs Switchable Outlets
•2 load banks, each with 2 outlets controllable remotely to reboot equipment or shed nonessential loads Automatic Voltage Regulation (AVR)
•Maintains 120V nominal output over input range of 83V-147V without using battery power EMI/RFI Line Noise Filtering
•Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance Interactive LCD Screen
•Front-panel LCD monitors operating mode, load level, power factor, voltage, battery charge and estimated runtimes
•Rotates for easy viewing in rack-mount or tower configurations Optional Network Management Cards
•Compatible with Tripp Lite UPS management cards, including WEBCARDLX and SNMPWEBCARD Communications Ports
•USB and DB9 ports combine with included PowerAlert software to monitor operating conditions, monitor AC power, and enable safe unattended system shutdown and file saves in case of a prolonged power failure
•EPO port supports emergency shutdown in large facilities Versatile Installation Options
•Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack
•Mounts on wall or 2-post rack with optional 2POSTRMKITWM accessory
•Mounts in upright tower position with optional 2-9USTAND accessory TAA Compliant
•Complies with Federal Trade Agreements Act (TAA) for GSA Schedule purchases