product id: 101118
Tripp Lite UT750UL Utility Work Truck Inverter / Charger are the quiet alternative to gas generators with no fumes, fuel or noise. It provides equipment with utility or generator supplied AC electricity filtered through premium ISOBAR surge protection. This DC-to-AC inverter with automatic line to battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter suitable for rugged work site applications. Supplies up to 750 watts of continuous 120V AC power from any 12V DC battery or automotive DC source. OverPower inverter output feature temporarily provides up to 150% of the continuous output for 1-60 minutes, and DoubleBoost inverter out put feature delivers up to 200% of continuous output for up to 10 seconds, providing the extra power needed to start heavy-duty tools and motorized equipment. When AC cable is connected to a live wall socket, commercial power passes through to connected equipment and the battery set is recharged via 3 stage selectable 11/45Amp charging system. In UPS mode, the APS system responds to blackouts and voltage fluctuations with a near instantaneous automatic transfer to battery derived AC output. A set of high current DC input terminals is included for simple installation (user supplies batteries and cabling – see owners manual for recommendations). Passes sine wave utility or generator power during battery charging and UPS line power operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large transformer design, with frequency control, powers resistive electronic loads or large inductive motors, compressors and other devices with high current needs on startup. Included is the APSRM4 wired remote power switch with full status LED’s, which provides remote power inverter on/off switching and continuous status information. The UT750UL supports an unlimited amount of runtime with user-supplied batteries. NOTE: To protect against high current draw that may occur during inverter failure, a fuse link rated at 125a should be positioned no more than 18" from the UT750UL's battery in the positive line.
•230V Switched PDU with built-in web/network interface in 2U rackmount form factor; 32A capacity
•Blue 230V IEC-309 32A (2P+E) input cable; 12 ft. / 3.6m power cable included
•16 switched C13 outlets
•2U horizontal rackmount form factor
•Supports power-on, power-off or reboot of each outlet on a real-time or programmable basis
•Enables reboot of locked equipment, custom power-on/power-off sequences, load-shedding of optional loads and disabling unused outlets
•Network interface provides PDU control and data regarding input voltage, frequency and loading information
•Digital display reports load level information in amps
•Supports user-specified alarm notification thresholds
•DHCP/Manual configuration support
•10/100 Mbps auto-sensing
•Real-time clock backup maintains the time of day and date even if the PDU is unpowered
•Alert notifications via email or SNMP traps offer immediate event notification
•Firmware upgrade ability supports future product enhancements
•Pre-installed WEBCARDLX with the latest version of PowerAlert Device Manager firmware (PADM20) provides enhanced remote management capabilities
•PADM20 and PowerAlert Element Manager (PAEM) form a powerful tool for expanding maintenance functions in large installations, including firmware update checks and backup and restoration of device configurations
•IP-based Auto Probe detects lost connectivity and restores service autonomously
•Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats
•Mounting ears are reversible for front or rear facing rackmount installation
•Included cord retention brackets
•TAA Compliant
| Color | |
| Includes | |
| Type | |
| Note | |
| Warranty Information |
Why Buy from InstruHub:
Similar products
