product id: 101332
Tripp Lite's Enhanced Category 5 Patch Panels offer you all the functionality and compatibility as any name brand. Each panel comes with 110-type termination, while meeting and exceeding EIA/TIA TSB-40 Cat5e connecting hardware specifications. Color coded for both EIA/TIA 568A & 568B installations. 48 ports ensure a wide range of plug-n-play options. The clear numbering on both the front and back of each panel gives you a quick and easy way to identify cable runs and the high density 19in panel design will save you valuable space in on the rack.UTP Cat5e 22-24 AWG solid cable
•EMS1250UL serves as an automotive or stationary DC-to-AC inverter with automatic line-to-battery transfer and integrated battery charger
•Supports 120V AC output from a 120V AC line power source or 12V DC battery source
•16.6 millisecond automatic transfer between line and battery power supports UPS protection during blackouts and voltage fluctuations for equipment compatible with a one cycle transfer time
•1250 watts continuous AC output in inverter mode, 1440 watts continuous AC output in AC mode
•Double Boost™ inverter output supports momentary startup loads up to 200% of the continuous rating for up to 10 seconds
•OverPower™ inverter output supports longer duration overloads to 150% for 1-60 minutes under ideal battery and temperature conditions. (For best results, utilize OverPower usage for as short of a duration as possible, ensure battery bank and cabling is able to provide full nominal DC voltage under load and allow inverter/charger to fully cool before and after OverPower usage.)
•3 stage, selectable 14/55 amp battery charger with adjustable settings for wet/gel battery types offers fast, reliable battery recharging
•Anderson quick connect DC wiring terminals safely accept input from attached battery bank
•Protected hardwire output passes 120V line power or inverter output through to connected equipment
•Reliability enhanced large-transformer design tested to UL (USA) and CSA (Canada) standards
•Moisture-resistant construction enables vehicular or marine operation in high humidity environments
•3 position operating mode switch supports "AUTO" mode to enable automatic transfer between DC and AC modes, CHARGE-ONLY to maintain a full battery charge when AC is present without auto transfer and SYSTEM OFF settings
•Set of six front panel LEDs display AC/DC operational modes, overload status, DC voltage level, shutdown status and system fault status
•Set of 4 configuration dipswitches support wet/gel battery charging profiles, adjustable 135/145V high voltage auto transfer during overvoltages and selectable 75/85/95/105V AC low voltage auto transfer during brownouts
•Set of 4 additional configuration dipswitches support 4 levels of charger limiting relative to output load size, a battery equalization program and battery charger low/high/off settings
•Resettable 12A charger AC input breaker and resettable 12A AC output breaker and automatic 2 speed cooling fan protect the inverter from load and temperature related failures
•Grounding lug properly connects the inverter/charger system to earth ground or vehicle grounding system
•Automatic overload and thermal shutoff safely turns off inverter as excessive loads or overheating conditions develop
•Front panel remote control connector enables remote off/on switching (APSRM4 remote control switch with status LED display and 50 ft cable included). APSRM4 accessory also includes user configurable jacks to support inverter shutoff or startup as a vehicle ignition is engaged
•Load sensing control dial enables adjustable load threshold required to automatically turn the inverter on and off in DC mode as load conditions change
| Includes | |
| Note | |
| Warranty Information |
Why Buy from InstruHub:
Similar products
