Rohde & Schwarz RT-ZS10E.02 Active Probe, Single-Ended, 1GHz, 8 V, 10:1, 8 pF, 1 Mohm, 1.2m Cable

RT-ZS10E Single-Ended Active Probe

Features:

• Attenuation: 10:1
• Bandwidth: 1.0 GHz
• Max. voltage: ±8 V
• Input Impedance: 1 Megohm || 0.8 pF
• Rohde & Schwarz probe interface

High signal fidelity with active probes
Rohde&Schwarz single-ended active probes accurately measure ground-referenced signals. They precisely measure both high-speed and low-frequency signals for which it is critical that the probe impedance places only a minimal load on the test point.

Wide dynamic range with additional offset compensation
In addition to their wide dynamic range, RS single-ended active probes also offer an offset compensation. As a result, the DC component of the measured signal can be compensated so that the signal components of interest are displayed on the oscilloscope at maximum resolution.

Low offset and gain errors, minimal temperature drift
The minimal gain drift coupled with the offset compensation permits precise measurements – even over extended periods of time and at varying temperatures. Frequent compensation during the measurement is no longer necessary, simplifying everyday measurement tasks.

RT-ZS10E includes limited set of accessories: (5) Signal pin; (2) Ground pin, pogo; (2) Ground pin, solderable, offset; (1) Lead, 15 cm / 5.9 in; (1) Mini clip; (1) Marker band kit

Note: The R&S RT-ZS10E does NOT offer the offset compensation, micro button and R&S ProbeMeter functions.