Category: Pressure Calibrators

Manufacturer: WIKA

WIKA CPP1600 Hydraulic Pressure Pump

product id: 105640

Category: Pressure Calibrators

Manufacturer: WIKA

InstruHub is a leading supplier and reseller of WIKA Pressure Calibrators in Nigeria, and we ship to all major cities such as Lagos, Abuja, Ibadan, Kano, Port Harcourt, Benin City, Aba & Warri

Features

0 to 23,200 psi (0 to 1600 bar) ranges
Brass cylinder and stainless steel piston
Ergonomic handling
Smooth, internally operating spindle
Integrated reservoir (250cm³) for transmission medium
- Choice of mineral oil or clean water
Removable star handle
2 freely rotating connectors for aligning instruments
- G1/2 female threaded quick-connectors w/ o-rings
CE approved

What's in the Box

Priming pump
Spindle pump
2 G1/2 female connectors
Operating instructions

The WIKA CPP1600 hydraulic pressure pump generates pressure for testing, adjustment and calibration of mechanical and electronic pressure measuring instruments through comparative measurements. These pressure tests can take place in the laboratory or workshop, or on site at the measuring point.

The smooth running of the hand spindle enables fine control even at very high pressures and it only runs within the pump body which eliminates any harmful bending from an externally running spindle.

Druck DPI610E Pressure Calibrator

Hand-held pressure calibrator from 95% vacuum to 500psi (35bar) pneumatic pressures and up to 15,000psi (1,000bar) hydraulic pressures.

Druck DPI 610 / 615 IS Pressure Calibrator

Intrinsically safe portable pressure calibrators for pressure ranges from -14.7 to 6,000 psi.

Additel ADT 937 Hydraulic Calibration Pump

High pressure hydraulic pump that Generate 85% vacuum to 15,000 psi (1,000 bar) pressure, three pressure ports.

Druck DPI 612 Flex Series Pressure Calibrator

Three model choices, generate as low as 95% vacuum or as high as 15000 psi with accuracy up to 0.005% FS.

Druck PV212 Hydraulic Hand Pump

Up to 15,000 psi (1000 bar), quick priming and pressure generation using scissor action pump.

Druck DPI 104 Calibration Kit

Precision pneumatic and/or hydraulic digital pressure calibration test kits.

Druck PV211 Pneumatic Hand Pump

0 to 600 psi or 0 to 28.5 inHg vacuum pressure with precision vernier control.

Druck PV411A Pressure and Vacuum Hand Pump

Four in one hand pump: hydraulic, pneumatic, vacuum, inH2O.

Druck UNIK 5000 Pressure Sensing Platform

Configurable silicon pressure sensor solution with a wide range of accuracies, outputs, temperature ranges & construction options.

Druck 1800 Series Submersible Pressure Transmitters

Fully submersible, high performance sensor with millivolt or milliamp output for measuring hydrostatic liquid levels.

GF Signet 2450 Pressure Sensor

Pressure sensor for corrosive fluids.

Druck TERPS RPS/DPS 8000 Pressure Sensor

TERPS technology platform offers high 0.01% FS precision accuracy and stability.

APG PT-500 Pressure Transducer

Rugged submersible pressure transmitter designed for tank liquid level or well depth measurement, in water and wastewater applications.

WIKA LS-10 Pressure Transmitter

Submersible pressure transmitters for liquid level measurements of holding tanks, wet wells, and rivers.

WIKA LH-10 Pressure Transmitter

High accuracy, submersible pressure transmitter for liquid level measurements of holding tanks, wet wells, and rivers.

Flowline DeltaSpan LD31 Submersible Pressure Level Transmitter

Continuous level measurement up to 46’ (14m) of water column with a 4-20 mA signal output.

Ametek CTC Series Temperature Calibrators

Fast, time-saving, reliable dry block temperature calibrator designed for on-site use. CTC-155, CTC-350, CTC-652, CTC-660, and CTC-1205.

Ametek PTC Series Temperature Calibrators

Accurate, dual-zone heating technology, color VGA display.

Ametek ETC Series Temperature Calibrators

Small, lightweight temperature calibrator with dry block or infrared target capabilities.

Accurate Thermal Systems ThermCal400 Temperature Calibrator

Portable, light weight, temp range: ambient 77°F (25°C) to 850°F (455°C), 12 minute heat up time and 20 minute cool down, stainless steel top and bottom.

Ametek RTC-700 Reference Temperature Calibrator

Triple-zone heating technology provides precise temperature calibration of any type temperature sensor.

Additel ADT875 Dry Block Calibrator

Portable calibrator with temperature ranges from -40 to 1220°F offers multi-channel readout, HART & self calibration feature.

Isotech Pegasus 4853 Dry Block Calibrator

150 to 1200°C high-temperature thermocouple calibration furnace.

Fluke Calibration 914X Field Metrology Wells

The 9142, 9143, & 9144 are for high performance, portable, and fast temperature calibration.

WIKA CTH7000 Precision Thermometer

High performance, hand-held, 2 channel thermometer for Pt100 and Thermistor probes.

Fluke 1586A Super-DAQ Precision Temperature Scanner

Accurately measures and logs thermocouples, PRTs, thermistors, DC voltage, DC current and resistance.

Ashcroft EI Series Bimetal Thermometers

1% full span accuracy, hermetically sealed case to prevent moisture entry, interior corrosion & coil freeze-up with a maxivision dial.

AccuMac AM8060 Precision Thermometer

Dual-channel digital readout for platinum resistance thermometers with high accuracy differential temperature measurement.

Fluke 50 Series II Contact Thermometers

Fluke 54, 53 52, 51, Dual/single input digital thermometers that feature laboratory accuracy (0.05% + 0.3°C).

WIKA CTH6300 Digital Thermometer

1 or 2 channel industrial hand-held thermometer with Pt100 and type K thermocouple probe options.

WIKA CTR2000 Precision Thermometer

High performance 2 or 8 channel digital thermometer, formerly the ASL F200.

Ashcroft CI Series Bimetal Thermometers

Tamper proof, hermetically sealed, Maxivision dial, designed for applications where external adjustment or pointer reset are not desired.