product id: 101826
Protects connected mission-critical equipment against damage, downtime and data loss due to blackouts, brownouts, surges and line noise. Converts incoming AC power to filtered DC power, then back to AC with a pure sine wave.
Protects Mission-Critical Rack-Mounted Equipment
•Protects equipment against data loss, downtime and damage due to power outages, voltage fluctuations and transient surges
•+/-2% voltage regulation in online and battery modes
•Selectable 120V 50/60 Hz output voltage with up to 0.9 power factor
•6 breakered NEMA 5-15/20R and 1 non-breakered L5-30R outlets
•10-ft. (3.05 m) AC power cord with NEMA L5-30P input plug
•504-joule surge protection rating for shielding connected devices from damaging power surges and spikes
Reliable Battery Backup with Expandable Runtime
•Supports half load for 13.8 min. and full load for 4.8 min.
•Zero transfer time between AC power and battery operation keeps network running during blackouts
•Expandable runtime with optional external battery packs, such as Tripp Lite's BP72V15-2U
ENERGY STAR Version 2.0 Certification
•High efficiency operation and low BTU heat output reduces energy costs and meets strict EPA guidelines
Switchable Breakered Load Banks
•NEMA 5-15/20R outlets divided into 2 numbered load banks, each of which may be individually powered on and off remotely to reset or reboot connected equipment
Front LED Panel
•14 LEDs indicate line power, online mode, economy/bypass mode, on-battery, overload, battery condition and fault status information
•Rotates for viewing in rack and tower formats
Audible Alarm
•Indicates power failure, overload, battery condition and EPO operation
Communications Ports
•USB and DB9 ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software (available via free download at www.tripplite.com/poweralert)
•Optional WEBCARDLX allows full remote access for power monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH
Versatile Installation Options
•Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack
•Mounts in 2-post rack with optional 2POSTRMKITWM
•Mounts in upright tower position with optional 2-9USTAND
Includes | |
Note | |
Warranty Information |
Why Buy from InstruHub: