Tripp Lite RV1512UL 1500W PowerVerter RV Inverter/Charger with Hardwire Input/Output

• 12V DC or 120V AC input; 120V AC output (hardwired)
• 1500 watts continuous, 2250 watts OverPower™ and 3000 watts DoubleBoost™ inverter output
• 3 stage, 19/75 amp selectable wet/dry cell battery charger
• Built-in Isobar® premium AC surge protection and Auto Transfer Switching option for battery backup / UPS operation
• Tested to power inverter standards UL458 (USA) and CSA (Canada)
• High reliability large-transformer design with protected DC and AC wiring terminals

•RV1512UL serves as an automotive or stationary DC-to-AC inverter with automatic line-to-battery transfer and integrated battery charger
•Supports 120V AC output from a 120V AC line power source or 12V DC battery source
•16.6 millisecond automatic transfer between line and battery power supports UPS protection during blackouts and voltage fluctuations for equipment compatible with a one cycle transfer time
•1500 watts continuous AC output in inverter mode, 1500 watts continuous AC output in AC mode
•Double Boost inverter output supports momentary startup loads up to 200% of the continuous rating for up to 10 seconds
•OverPower inverter output supports longer duration overloads to 150% for 1-60 minutes under ideal battery and temperature conditions. (For best results, utilize OverPower usage for as short of a duration as possible, ensure battery bank and cabling is able to provide full nominal DC voltage under load and allow inverter/charger to fully cool before and after OverPower usage.)
•3 stage, selectable 19/75 amp battery charger with adjustable settings for wet/gel battery types offers fast, reliable battery recharging
•Protected hardwire bolt-down input lugs safely accept heavy gauge input wiring from attached battery bank
•Protected hardwire output passes 120V line power or inverter output through to connected equipment
•Reliability enhanced large-transformer design tested to UL (USA) and CSA (Canada) standards
•Moisture-resistant construction enables vehicular or marine operation in high humidity environments
•3 position operating mode switch supports "AUTO" mode to enable automatic transfer between DC and AC modes, CHARGE-ONLY to maintain a full battery charge when AC is present without auto transfer and SYSTEM OFF settings
•Set of six front panel LEDs display AC/DC operational modes, overload status, DC voltage level, shutdown status and system fault status
•Set of 4 configuration dipswitches support wet/gel battery charging profiles, adjustable 135/145V high voltage auto transfer during overvoltages and selectable 75/85/95/105V AC low voltage auto transfer during brownouts
•Set of 4 additional configuration dipswitches support 4 levels of charger limiting relative to output load size, a battery equalization program and battery charger low/high settings
•Resettable 25A charger AC input breaker and resettable 20A AC output breaker and automatic 2 speed cooling fan protect the inverter from load and temperature related failures
•Grounding lug properly connects the inverter/charger system to earth ground or vehicle grounding system
•Automatic overload and thermal shutoff safely turns off inverter as excessive loads or overheating conditions develop
•Front panel remote control connector enables remote off/on switching (requires APSRM4 switch accessory). Optional APSRM4 accessory also includes user configurable jacks to support inverter shutoff or startup as a vehicle ignition is engaged
•Load sensing control dial enables adjustable load threshold required to automatically turn the inverter on and off in DC mode as load conditions change
•Includes battery temperature sensor with 20-ft. (6.09 m) cable to prolong battery life by adjusting the charge level based on battery temperature
•Automatic Generator Starter jack enables user configuration of automatic generator startup as inverter batteries drop to 11.5VDC and generator shutoff as inverter batteries are recharged to 14.1VDC