Pico Technology P2036 Passive Probes, 300MHz, 10x, BNC, 2.5mm, Dual Pack P2036

product id: 94729

Category: Oscilloscopes, Oscilloscope Probes

Manufacturer: Pico Technology

InstruHub is a leading supplier and reseller of Pico Technology Oscilloscopes, Oscilloscope Probes in Mongolia, and we ship to all major cities such as Mongolia


TA479 Passive Probe

Specs:

  • Attenuation ratio 10:1
  • Bandwidth 300 MHz
  • Voltage coefficient 0.00025 %/V
  • Risetime 1 ns
  • Cable length 1.3 m
  • Probe tip diameter 2.5 mm

Accessories:

  • Coding rings (set) 3 x 4 colors -1
  • Ground blade 2.5mm - 1
  • Ground lead 15cm - 1
  • Ground spring 2.5mm - 1
  • IC cap - 5 (1 of each color)
  • Insulating cap 2.5mm - 1
  • PCB adaptor kit 2.5mm - 1
  • Self-adhesive Cu pad 2 x 2cm - 2
  • Solid tip, CuBe, 0.5mm - 1
  • Spring tip, gold-plated 0.5mm - 1
  • Spring hook 2.5mm - 1
  • Trimmer tool - 1

The P2036 (Dual pack) is a state-of-the-art 10:1 miniature probes for oscilloscopes with up to 300 MHz bandwidth. The entire probe core is made of a high-quality CeramCore ceramic hybrid. Pure coaxial design and laser-trimmed resistors ensure highest signal fidelity along the signal path, offering high bandwidth and fast risetimes for accurate impulse measurements. With a maximum input voltage of 300 V CAT II, these probes are equally suitable in service and development environments. The read-out BNC connector is automatically recognized as a 10:1 divider by scopes such as the PicoScope 6000E Series that feature a sense ring.

The compact design with its 2.5 mm housing diameter at the tip provides better visibility on the DUT (device under test) in dense SMT circuits than conventional 5 mm housings.

The remarkably low input capacitance of only 9.5 pF applies a minimal load to the signal source, which is particularly important when measuring signals with fast risetimes. Only active or low-impedance probes can achieve lower loading than this.

The long ground leads found on most conventional probes bring additional inductance and resonances into the setup, which will result in false or inaccurate readings. The P2036 and P2056 are available with an optional IC contact system consisting of five different IC adaptors ranging from 1.27 to 0.5 mm pitch and a PCB adaptor kit, offering an ideal solution for short-circuit-proof, reproducible measurements. The probe is shipped with Pico's signature spring-loaded tips. There are up to 16 different accessories included with the probe, offering adaptive solutions for almost every probing demand.


Bandwidth 300 MHz
Alternate Product Number TA479
Attenuation 10X

Why Buy from InstruHub:




Similar products

call
phone whatsApp mail