product id: 96103
Includes:
Features:
Included with FPC1500: power cable and USB cable for connection to PC.
More Than A Spectrum Analyzer: The R&S FPC1500 provides the value of three most commonly used instruments on an RF engineer's workbench, for instance in IoT device development.
Spectrum Analyzer
Investment Protection / High Resolution / Easy Virtual Control
The R&S FPC1500 base instrument has a frequency range from 5 kHz to 1 Ghz with keycode options to unlock up to 3 GHz and other features. The FPC1500 provides the best dynamic range in its class. In combination with RBW settings down to 1 Hz, it resolves the finest details, which are displayed on the high-resolution 10.1 inch WXGA display. Wired or wireless remote control options included.
High Resolution
The quality of RF measurements strongly depends on suitable resolution bandwidth settings. Finer resolution bandwidth means more resolved spectral detail. High sensitivity is critical in many applications, e.g. when measuring extremely weak signals. The FPC1500 provides an extraordinarily low noise floor of typically -150 dBm with 1 Hz resolution bandwidth setting. The optional FPC-B22 preamplifier increases sensitivity even further, to typically -165 dBm, allowing for measurements of high-power signals of up to +30 dBm (1 W). The combination of low noise floor and high max. input power provides an exceptionally wide measurement dynamic range.
Network Analyzer
Internal VSWR Bridge / One-port Vector Network Analyzer / Smith Chart
The FPC1500 features an internal VSWR bridge that makes purchasing and mounting/ dismounting an external bridge unnecessary. S11 reflection measurements are supported, including Smith chart and DTF features.
Internal VSWR bridge
Due to its unique design utilizing an internal VSWR bridge, the FPC1500 can perform one-port vector reflection measurements. This feature makes it possible to take impedance measurements on RF antennas or RF circuits with the Smith chart display or distance-to-fault measurements to detect faulty locations over a long RF cable. The built-in internal VSWR bridge eliminates the need to mount/dismount an external VSWR bridge when switching between the measurement modes, e.g. from the spectrum analyzer mode to the vector network analyzer mode or vice versa.
Signal Generator
Tracking Generator / Independent Signal Source / Coupled CW Mode
The FPC1500 not only features standard tracking generator measurements with frequency offset functionality, its signal source is independent to enable signal generator functionality. A CW signal can be set within the frequency range, or in a coupled mode to follow the center frequency setting of the spectrum analyzer mode.
Tracking generator
RF engineering often requires testing of passive or active RF circuits that do not produce any RF signal on their own, such as amplifiers, filters or even RF cables. A standalone spectrum analyzer is not sufficient here, a signal generator is required. The FPC1500 features tracking generator functionality, which makes scalar transmission measurements possible, for example frequency response measurements on RF filters.
Independent signal source
The FPC1500 can do even more, using its integrated signal source in an independent mode. This unique capability enables the FPC1500 to act as a continuous wave (CW) signal generator. The source can be used e.g. as a LO signal for mixer measurements or as an input signal for amplifier gain measurements.
Unexpected performance and high value at a budget-friendly price
Investment protection, high resolution and easy control — these traits make the R&S FPC1500 spectrum analyzer a perfect tool for university laboratories, research institutions as well as production and service facilities.
| Series | |
| Condition | |
| Interface | |
| Special Features |
Why Buy from InstruHub:
Similar products
