ACL Staticide 8695 Silicone Conformal Coating, 11 oz Aerosol

product id: 54359

Category: Electronic Production Supplies, Chemicals, Cleaning & Abrasives

Manufacturer: ACL Staticide

InstruHub is a leading supplier and reseller of ACL Staticide Electronic Production Supplies, Chemicals, Cleaning & Abrasives in Mongolia, and we ship to all major cities such as Mongolia


  • Operating temperature: -55°F/-64°C to 390°F/199°C
  • Coefficient of thermal expansion (in/in/°C) 2.4 x 10-4
  • Contains UV tracer for easy quality control
  • High dielectric breakdown: 1100 volts/mil
  • Thermal expansion 3.4 @ 77°F under 1 khz
  • Meets MIL-I-46058C, Type SR
  • Compliant to IPC-CC-830B with amendment 1
  • Provides excellent flexibility
  • Flammable
  • Made in USA, RoHS compliant

This highly effective insulative barrier is the ideal choice for protection against rust and corrosion in high humidity situations. Although not intended for outdoor use, Silicone Conformal Coating provides protection against the intermittent exposure of rain and salt on printed circuit board and electronic assemblies. This tough, transparent coating will not fragment, chip, or crack, and provides exceptional flexibility. The minimum dielectric strength is 700 volts/mil. This formula is ready-to-use as there is no mixing required.

Container Type Aerosol Can
Temperature Range -55°F/-64°C to 390°F/199°C
Container Volume 11oz.
Flammable Yes
Cure Time 1.0 mil cures tack-free in 30 minutes. Heat cures 8 hours at 170°F (76°C). Full cure requires 24 hours.
Direction Shake well. Apply to clean and dry unmasked areas. Spray top to bottom, allowing coating to flow lightly around components. Rotate board 90 degrees and repeat. Open vessel of water in drying chamber will accelerate drying.

Why Buy from InstruHub:




Similar products

call
phone whatsApp mail