Category: Flow Meters

Manufacturer: Flowline

Flowline FT10 / GT10 Thermo-Flo Liquid and Gas Flow Switch

product id: 103874

Category: Flow Meters

Manufacturer: Flowline

InstruHub is a leading supplier and reseller of Flowline Flow Meters in Kazakhstan, and we ship to all major cities such as Almaty, Atyrau, Uralsk, Aktau, Aktobe, Pavlodar & Shymkent

Features

Ranges:
- FT10: 0.04 to 3 fps (0.012 to 0.91 mps)
- GT10: 1 to 90 fps (0.3 to 27 mps)
Factory set point:
- FT10: 2fps (.06 mps)
- GT10: 10 fps (3 mps)
Sensor lengths:
- Short: pipe or ducting from 1/2” to 1 1/2”
- Long: pipe or ducting of 2" or higher
Pressure rating:
- 150 psi (10 bar) @ 25ºC
- derated @ 1.667 psi (0.113 bar) per ºC above 25º C
Repeatability: ±0.5% of set point
Response time: 1 to 10 seconds
Process temp: 32 to 140°F (0 to 60°C)
NEMA4X (IP65) rated
Adjustable set point with LED for flow or no-flow status indication
60VA relay selectable NO or NC via power supply wiring polarity
Solid state sensor is not damaged by over-ranging flow velocities
Ideal for monitoring chemical feed pumps
Use to monitor flow/no-flow conditions

The Flowline FT10 / GT10 Thermo-Flo Liquid and Gas Flow Switch provide reliable low or no-flow detection of relatively clean, non-coating media with one 1A relay output. Liquid examples include water and acetic acid. Available in Polypropylene-Ryton® and PVDF, the short flow sensor is used in pipe or ducting from 1/2" to 1 1/2", and the long flow sensor is used in 2" and up. The flow switch set point may be adjusted from 0.04 to 3 fps in liquids, or 1 to 90 fps in gases as a low-flow alarm. The flow sensor is best applied in applications with relatively constant temperature.