Pico Technology P2036 Passive Probe, 300MHz, 10x, BNC, 2.5mm, Single Pack P2036

product id: 94728

Category: Oscilloscopes, Oscilloscope Probes

Manufacturer: Pico Technology

InstruHub is a leading supplier and reseller of Pico Technology Oscilloscopes, Oscilloscope Probes in Kuwait, and we ship to all major cities such as Kuwait


TA436 Passive Probe

Specs:

  • Attenuation 10:1
  • Resistance at probe tip: 10 Megohm
  • Capacitance at probe tip: 9.5 pF
  • Scope input impedance: 1 Megohm
  • Bandwidth: (3 dB) DC to 300 MHz
  • Maximum working voltage: 300V RMS CAT II
  • Risetime: (10% to 90%) 1ns
  • Compensation range: 10 to 25pF
  • Compatibility: PicoScope 6000E Series 300 MHz oscilloscopes

Accessories :

  • 1 x Coding rings (set) 3x4 colors
  • 1 x Ground blade 2.5mm
  • 1 x Ground lead 15cm
  • 1 x Ground spring 2.5mm
  • 1 x Insulating cap 2.5mm
  • 1 x Sprung hook 2.5mm
  • 1 x Trim tool

The P2036 (Single pack) is a state-of-the-art 10:1 miniature probes for oscilloscopes with up to 300 MHz bandwidth. The entire probe core is made of a high-quality CeramCore ceramic hybrid. Pure coaxial design and laser-trimmed resistors ensure highest signal fidelity along the signal path, offering high bandwidth and fast risetimes for accurate impulse measurements. With a maximum input voltage of 300 V CAT II, these probes are equally suitable in service and development environments. The read-out BNC connector is automatically recognized as a 10:1 divider by scopes such as the PicoScope 6000E Series that feature a sense ring.

The compact design with its 2.5 mm housing diameter at the tip provides better visibility on the DUT (device under test) in dense SMT circuits than conventional 5 mm housings.

The remarkably low input capacitance of only 9.5 pF applies a minimal load to the signal source, which is particularly important when measuring signals with fast risetimes. Only active or low-impedance probes can achieve lower loading than this.

The long ground leads found on most conventional probes bring additional inductance and resonances into the setup, which will result in false or inaccurate readings. The P2036 and P2056 are available with an IC contact system consisting of five different IC adaptors ranging from 1.27 to 0.5 mm pitch and a PCB adaptor kit, offering an ideal solution for short-circuit-proof, reproducible measurements. The probe is shipped with Pico signature spring-loaded tips. There are up to 16 different accessories included with the probe, offering adaptive solutions for almost every probing demand.


Bandwidth 300 MHz
Alternate Product Number TA436
Attenuation 10X

Why Buy from InstruHub:




Similar products

call
phone whatsApp mail