Tripp Lite PDUMNH32HVAT 7.7kW Single-Phase 200-240V Monitored Automatic Transfer Switch PDU, Two 32A IEC309 32A Blue Inputs, 1 IEC309 32A Outlet, 1U

• Two IEC 309 32A Blue (2P+E) inputs, each with 10-ft. (3.05 m) input cord
• One IEC 309 32A Blue (2P+E) output receptacle for connecting device or multi-outlet PDU
• ATS / Automatic Transfer Switching within 1-5 ms
• Pre-installed WEBCARDLX with latest version of PADM20 for enhanced remote management
• Digital display with LEDs for real-time status monitoring

High-capacity 7.7kW PDU with ATS provides remote power monitoring and enables redundant power for non-redundant hardware. Digital display and Ethernet interface allow site power status monitoring for primary and secondary inputs, plus load level monitoring to prevent overload conditions.
Primary and Secondary Inputs for Power Redundancy
•Enables redundant power configurations for network devices with a single input cord or other non-redundant power supply configuration
•Two IEC 309 32A Blue (2P+E) inputs, each with 10-ft. (3.05 m) cord, connect to separate primary and secondary input power sources
•Any two input power sources are supported for primary and secondary inputs, including out-of-phase power sources Built-In IEC 309 32A Blue Outlet
•Power a single 32A plug-in device or multiple network devices through a connected 32A 200-240V multi-outlet PDU, such as Tripp Lite's PDUMV32HV metered PDU input (sold separately) Automatic Transfer Switching
•Dynamic solid-state (TRIAC) automatic transfer switching
•Switches to secondary power source if primary source fails or becomes unstable
•1-5 ms transfer time ensures uninterrupted operation of connected equipment
•Built-in processor monitors power sources and prevents switching if secondary source is unavailable or of lower quality than primary source Touchscreen LCD
•Reports input status for primary and secondary power sources, power availability, line voltage, frequency, amps, kilowatts and power factor Advanced Network Monitoring
•Pre-installed WEBCARDLX with the latest version of PowerAlert Device Manager firmware (PADM20) provides enhanced remote management capabilities
•PADM20 and PowerAlert Element Manager (PAEM) form a powerful tool for expanding maintenance functions in large installations, including firmware update checks and backup and restoration of device configurations Broad Communications Compatibility
•Java-free LX Platform HTML5-based network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH
•Supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network
•Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.
•10/100 Mbps auto-sensing for communication with 10/100 Base-T networks Mounts Horizontally in 1U of Rack Space
•Compatible with EIA-standard 19 in. 4-post racks and rack enclosures
•Included PDU4PKIT rail kit adds rear rack-mounting support