3M 1182 Tape, 1182, EMI Shielding, Copper Foil, Double Coated, 1in x 18yds, 9 Rolls/Case

• Deadsoft 1-ounce copper foil backing
• Conductive acrylic adhesive on both sides
• Supplied with removable liner on both sides
• Backing thickness: 1.4 mil (0,04mm)
• Total thickness (backing plus adhesive on both sides): 3.5 mil (.088mm)
• Breaking strength: 25 lb./in (44 N/10mm)
• Adhesion to steel: 35 oz/in (3,8 N/10mm)
• Electrical resistance through adhesive: 0.010 ohm

1182 Tape consists of a 1-ounce deadsoft copper foil backing that is coated on both sides with a unique electrically conductive pressure sensitive acrylic adhesive. Double-sided copper tape would typically be used as an electrical path between two surfaces, its most important feature is its conductivity. Highly conductive particles in the acrylic adhesive provide a multitude of electrical paths between the application substrate and the surface of the copper foil on each side. The resistance of the conductive path through the adhesive (measured over a 1-in 2 area) typically measures only a few milliohms.