Instek GDS-2202E Digital Storage Oscilloscope

product id: 70868

Category: Oscilloscopes, Digital Oscilloscopes

Manufacturer: Instek

InstruHub is a leading supplier and reseller of Instek Oscilloscopes, Digital Oscilloscopes in Kenya, and we ship to all major cities such as Nairobi & Mombassa


  • 200, 100, 70 MHz Bandwidth models; 2- or 4-Channels
  • 1 GSa/s Real-Time Sampling Rate for Each Channel (2 ch. models);  1 GSa/s Maximum Real-Time Sampling Rate (4 ch models)
  • Standard 10M Maximum Memory Depth and VPO Waveform Display Technology
  • Waveform Update Rate of 120,000 wfm/s
  • 8” WVGA TFT LCD Display
  • FFT with Maximum 1M points to Provide Higher Frequency Domain Resolution Measurement
  • High and Low Pass Digital Filter Functions
  • 29,000 Sections of Segmented Memory and Waveform Search Functions
  • I2C/SPI/UART/CAN/LIN Serial Bus Trigger and Decoding Function
  • Data Log Function Tracks Signal Changes Up To 100 hours
  • Provide Remote Internet Storage Function
  • Three-year warranty

2- and 4-Channel models in 70, 100 and 200 MHz Bandwidths
The GDS-2000E digital oscilloscope series features bandwidth selections of 200 MHz, 100 MH, and 70 MHz. The two-channel models provide 1 GSa/s real-time sampling rate for each channel; while the four-channel models provide 1 GSa/s maximum real-time sampling rate. All models are equipped with waveform update rate of 120,000 wfm/s.

Fast Retrieval, Precision Measurement
The GDS-2000E series provides 10 Mega point record length in each channel with Waveform Search and Segmented Memory functions, which greatly enhance the value of long memory utilization of these DSOs. The 8-inch 800 x 480 TFT LCD display and the minimum 1mV/div vertical range allow the GDS-2000E series to measure complex feeble signals and clearly display complex and random waveforms.

Low Background Noise
For small signal measurement, oscilloscope's background noise will affect the measurement results. The GDS-2000E low noise amplifying circuit can tremendously improve overall noise interference to produce the genuine signal demonstration.

GDS-2000E Series Digital Storage Oscilloscope
GDS-2000E oscilloscopes feature adjustable backlight intensity.

Please refer to Data Sheet for complete specifications.

120,000wfm/s Waveform Update Rate
The GDS-2000E digital oscilloscope allows you to easily observe rare transient waveforms and jitters with the high waveform update rate of 120,000 wfm/s. The advanced VPO (Visual Persistence Oscilloscope) signal processing technology combines the multi-layered gray display to enhance waveform display efficiency that allows you to easily and completely observe inrush signals and rare transient waveforms to increase waveform debugging efficiency.

1M FFT Display
The FFT (Fast Fourier Transform) function of the GDS-2000E Series provides the maximum 1M points display. The function supports four window displays, including Rectangular, Hamming, Hanning, and Black-harris, allowing you to select window display for frequency domain analysis according to your test requirements. The GDS-2000E series not only provides the FFT function but also FFTrms, vertical adjustment, and local zoom-in functions. Via rapid waveform update rate and waveform search functions, you can precisely observe the test results of frequency domain.

Support I2C/SPI/UART/CAN/LIN Decoding and Analysis
The serial bus technology has been widely applied in the present embedded application design. The GDS-2000E series provides serial bus analysis function and 10M long memory depth to trigger, decode, and analyze, in a long period, frequently used I2C, SPI and UART serial bus and CAN/LIN bus, which is often used by automotive communications.

The GDS-2000E series shares many rich functionalities with the GDS-2000A series — including Zoom Window, Play/Pause, 36 automatic measurements with statistics mode, and remote software and digital voltage meter.

GDS-2000E GDS-2000A
Bandwidth 70/100/200 MHz 70/100/200/300 MHz
Sampling Rate Max. 1GSa/s (4 channel model)
Per channel 1GSa/s (2 Channel model)
Max. 2GSa/s
Memory Depth 10 M 2 M
Display 8” TFT LCD WVGA (16:9, 800 x 480) 8” TFT LCD SVGA (4:3, 800 x 600)
Waveform Update Rate 120,000 WFMs/sec 80,000 WFMs/sec
Options N/A Logic Analyzer, Function generator, GPIB, LAN/VGA
Waveform Signal Process +, —, X, ÷, FFT, FFTrms, User-defined math +, —, X, ÷, FFT, FFTrms, ∫dt, d/dt, √
Interface USB (1 device, 2 host), Go/NoGo, Kensington lock, LAN USB ( device *1, host *2 ), RS232, Go/NoGo, Kensington lock, GPIB (optional), LAN/VGA output (optional)

The GDS-2000E Series' applications include educational training and laboratory, Q/A testing, serial bus design and debugging, and maintenance services.

Included: user's manual on CD, quick start guide, power cord, (1) probe per channel: GTP-070A-4 (70 MHz), GTP-150A-4 (100 MHz), GPT-300A-4 (200 MHz).
Free download: OpenWave software. Driver: USB driver, LabVIEW.


Type DSO
Condition New

Why Buy from InstruHub:




Similar products

call
phone whatsApp mail