Tripp Lite SM1500RMXL2UTAA TAA SmartPro 120V 1.5kVA 1.35kW Line-Interactive Sine Wave UPS, 2U, Extended Run, Network Card Options, LCD, USB, DB9

• Corrects under- and overvoltages from 83V to 145V
• 8 NEMA 5-15R outlets—4 switchable via network interface
• Network power management and control capability
• Expandable runtime with optional external battery packs
• 14 min. runtime at half load; 4.9 min. at full load
• To use the Auto Probe feature, this product requires a WEBCARDLX network interface (sold separately) running LX firmware update 15.5.2 or later

Protects connected mission-critical equipment against damage, downtime and data loss due to blackouts, brownouts, power surges and line noise. Ideal solution for servers, storage devices and telecom hardware.
Protects Mission-Critical Rack-Mounted Equipment
•Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
•Audible alarm signals loss of utility power, overload, low battery and more
•8 NEMA 5-15R outlets
•10-ft. (3.05 m) power cord with 120V NEMA 5-15P input
•570-joule surge suppression rating Reliable Battery Backup with Expandable Runtime
•Supports half load up to 14 min. and full load up to 4.9 min.
•Internal batteries designed for hot-swap field replacement
•Expandable runtime with optional external battery packs, such as Tripp Lite's BP36V15-2U
•95% line-power efficiency rating saves money in energy costs Switchable Outlets
•2 load banks, each with 2 outlets controllable remotely to reboot equipment or shed nonessential loads Automatic Voltage Regulation (AVR)
•Maintains 120V nominal output over input range of 83V-145V without using battery power EMI/RFI Line Noise Filtering
•Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance Interactive LCD Screen
•Front-panel LCD monitors power status, operating data, voltage, alarm and other options
•Rotates for easy viewing in rack-mount or tower configurations Optional Network Management Cards
• Compatible with Tripp Lite UPS management cards, including TLNETCARD, WEBCARDLX and SNMPWEBCARD Communications Ports
•USB and DB9 ports enables data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from www.tripplite.com/poweralert
•EPO port supports emergency shutdown in large facilities Versatile Installation Options
•Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack
•Mounts on wall or 2-post rack with optional 2POSTRMKITWM accessory
•Mounts in upright tower position with optional 2-9USTAND accessory
•Mounts to front rails of 2- or 4-post rack with optional UPSHDEARKIT accessory TAA Compliant
•Complies with Federal Trade Agreements Act (TAA) for GSA Schedule purchases