Pico Technology 1216+B Data Logger w/Terminal Board, 16 Channel, 12 Bits, 1 MS/s, USB 2.0

PP547 (1216+B) Data Logger, 16 CH, 12 Bits w/ Terminal Board

Specs:

Data Logger:

• Multichannel data acquisition (DAQ)
• Up to 16 input channels per data logger
• Up to 4 output channels per data logger
• Use up to 20 data loggers at the same time
• Up to 1 MS/s sample rate
• USB connected and powered
• Data acquisition software and SDK

Terminal Board:

• Dimensions 66 x 72 x 17mm (approx. 2.6 x 2.83 x 0.67in.)
• Terminal wire size 0.6-1.6mm (14-22 AWG)

Includes:

• USB cable (MI106)
• Software and Reference CD-ROM (DI025)
• USB Installation Guide (DO112)
• External Terminal Board

PicoLog 1000 Multichannel DAQ Series

Designed to meet the needs of a wide range of general-purpose voltage, sensor and transducer logging applications, the PicoLog 1000 Multichannel DAQ Series features independent software-configurable scaling and control outputs, an external terminal board for custom front-end circuitry and a choice of 10 or 12-bit input resolution.

External Terminal Board

The external terminal board has screw terminals to allow sensor wires to be attached to the data logger without soldering. The terminal board also has locations where you can fit resistors to offset and extend the input ranges of the logger.

Its solder pads to allow you to fit resistors that divide the input voltage to each channel by a known ratio, thereby expanding the measuring range by the same ratio. For example, if you divide the input voltage by 4, then the effective input range of the Data Logger is increased from 2.5 V to 10 V on that channel.