AEMC Instruments SL40 Simple Logger, 1CH, 8 Samples/Sec, USB, w/Software

AEMC SL40 Simple Logger

Features:

• Channels: One
• Input: External RTD1000
• Range: Depending on RTD used -94 to 1022F (-70 to +550C)
• Accuracy: (50/60Hz) ±(1% R +1.8F) or ±(1% R +1C) with filter set to 10
• Resolution: 0.1 Degree
• Sample Rate: 8 samples/second
• Storage Rate: 1 second
• Storage Modes: Start/Stop
• Recording Length: ≥43 days
• Communication: USB 2.0
• Memory: 4 million measurements (8Mb). Recorded data is stored in non-volitile memory and will be retained even if battery is low or removed.
• Battery Life: 43 days with new batteries when recording

The Simple Logger Model SL40 is a small one channel recording device powered by two AA alkaline batteries. It can also be powered by 5V using the USB interface cable supplied. The input it configured to measure temperature from two-wire 1k Platinum RTDs. Inputs are facilitated by two screw terminals. Sample rate is 16/sec with a storage rate of once per second of the average of all the samples. Application software is included with the unit by plugging it into your computer using the USB cable and downloading it from aemc.com. Scaling units of measure and recording length can be set through the software. Real-time graphs can be displayed, downloaded data can be analyzed, and reports printed.

The main advantage of the logger is its ability to begin recording with only the need to configure the length of time for the recording. A simple one button operation is all you need. The front panel LED alerts the operator of the logger's status.