Category: Flow Meters

Manufacturer: Badger Meter

Badger Meter RCT1000 Coriolis Flow Meter

product id: 103796

Category: Flow Meters

Manufacturer: Badger Meter

InstruHub is a leading supplier and reseller of Badger Meter Flow Meters in Iraq, and we ship to all major cities such as Baghdad, Mosul, Najaf, Kirkuk, Basrah, Erbil & Sulaymaniyah

Features

Measures either liquid or gas
Unobstructed open flow design
Pipe sizes 1/4 inch up to 3 inches
Accuracy:
- Liquids: up to ±0.1% of flow rate ± zero stability
- Gases: up to ±0.5% of flow rate ± zero stability
- Density: up to ±0.03121 lb/ft3 (0.0005 g/cm3)
Zero stability up to ±0.025% of full scale
Repeatability up to ±0.05% of flow rate
-40 to 392°F (-40 to 200°C) process temp range
Wetted material: 316L stainless steel

A completed RCT1000 application data form is required for this meter. We will contact you about your order.

Badger Meter RCT1000 Coriolis Flow Meter identifies flow rate by directly measuring mass flow and density of fluids over a wide range of process temperatures with a high degree of accuracy. For homogenous fluids consisting of two components like sugar and water, the RCT1000 Coriolis system can derive the concentration and mass of each component based on fluid properties and density measurement. Furthermore, the unobstructed, open flow design makes it suitable for a variety of fluids such as slurries and other viscous, nonconductive fluids that are difficult to measure with other technologies.

The Coriolis design and measurement principle allows the meter to be an exceptional device in measuring:

Vegetable oils and fats
Homogeneous suspensions and slurries
Adhesives, glues or binding materials
Coatings and hardeners
Dyes, fragrances, vitamins and other additives

The RCT1000 transmitters provide a variety of means to integrate the meter's output into new and existing operations. The batch and PID functionality enables direct control of devices, such as valves, by use of digital or analog outputs. Additionally, programmable digital outputs can indicate low and high alarm conditions. Network options are available including EtherNet/IP, Modbus TCP/IP and Modbus RTU.