Honeywell Sensepoint Gas Detector

product id: 104239

Category: Gas Detectors

Manufacturer: Honeywell

InstruHub is a leading supplier and reseller of Honeywell Gas Detectors in Ghana, and we ship to all major cities such as Accra


Features

  • Proven electrochemical and catalytic bead sensor technology
    • Flammable: 0-100% LEL
    • Oxygen: 0-25% VOL
    • Carbon monoxide: 0-200ppm, 0-500ppm
    • Hydrogen sulfide: 0-20ppm, 0-50ppm, 0-100ppm
    • Hydrogen: 0-1000ppm
    • Chlorine: 0-5ppm, 0-15ppm
    • Sulphur dioxide: 0-15ppm, 0-50ppm
    • Nitrogen dioxide: 0-10ppm
    • Ammonia: 0-50ppm, 0-1000ppm
  • High performance, low cost
  • Suitable for new and retrofit applications
  • Typical 2 to 5 years operational life
  • Hazardous area approval and performance
  • IP65 / 66 for use in harsh environments

The Honeywell Sensepoint range of flammable, toxic and Oxygen gas detectors offers users a cost-effective solution to their gas monitoring needs, in or out of doors and even in potentially explosive atmospheres. Supplied with a pre-wired junction box, this detector can be installed using conduit or armored cable and glands depending on the specific needs of the application.

The Sensepoint flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

Sensepoint toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Exd, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of ‘sticky' gases such as Chlorine and Ammonia.

Sensepoint gas detectors are designed for easy access to terminals via the hinged lid of the junction box. Installation should follow national guidelines using suitably approved armored cable and glands or conduit. Supplied with an earth continuity plate for increased resistance to the effects of RFI, the junction box offers the installer a choice of ½", ¾" and M20 connection via conduit or armored cable and Ex e certified cable glands.

Sensepoint flammable, toxic and oxygen gas detectors are designed for direct connection with the Honeywell Analytics' range of Touchpoint controllers

Why Buy from InstruHub:




Similar products

call
phone whatsApp mail