Tripp Lite SU750RTXLCD2U SmartOnline 120V 750VA 675W Double-Conversion UPS, 2U Rack/Tower, Extended Run, Network Card Options, LCD display, USB, DB9 Serial

• 750VA / .75kVA / 675W on-line double-conversion 2U rack / tower UPS
• 100/110/120/127V 50/60Hz output; High efficiency economy mode option
• Interactive LCD with 9 selectable screens of UPS and site power data
• Expandable runtime, Hot-swap batteries, 12.5 in / 31.8 cm depth
• USB, RS232 & EPO ports, plus support for network card options
• 2 independently switched load banks
• NEMA 5-15P input; 6 NEMA 5-15R outlets
• To use the Auto Probe feature, this product requires a WEBCARDLX network interface (sold separately) running LX firmware update 15.5.2 or later

Tripp Lite SMART750RM1U 750VA / .75kVA / 600 watt line interactive, sine wave UPS system offers complete power protection for critical network applications in a highly efficient 1U total rack/vertical configuration. Simultaneous-use network management interfaces include USB, RS-232 and slot for optional Network Management Card options. Line interactive voltage regulation, network-grade surge suppression and long-lasting sine wave AC output during blackouts make this UPS ideal for advanced networking applications in datacenters, computer rooms and network closets.

•Tripp Lite SU750RTXLCD2U 750VA / .75kVA / 675W on-line, double-conversion 2U rack / tower UPS
•Transformerless, IGBT technology
•Selectable 100/110/120/127V output (120V factory preset)
•NEMA 5-15P input, 6 NEMA 5-15R outlets
•Two switched outlets support remote reboot or programmable load shedding options
•Supports 2% output voltage regulation and zero transfer time in double conversion mode
•Economy mode option offers enhanced efficiency, reduced power consumption and lower BTU emissions
•13.9 minutes runtime at 50% load (337.5W) and 4.3 minutes at 100% load (675W) with internal batteries
•BP24V15RT2U (limit 1), BP24V28-2U (limit 1), BP24V70-3U (multi-pack compatible) and BP24V36-2US (multi-pack compatible) external battery packs available (some configurations require Tripp Lite's External Battery Configuration Software)
• Intelligent battery management system with temperature-compensated charging extends battery life
•LCD interface reports operating mode plus 9 selectable screens of UPS data (Load % & kW, Load % & kVA, Power factor, Input volts & Hz, Output volts & Hz, Battery volts and charge %, Minutes runtime, Capacity remaining, Kw/hr. consumption)
•LCD interface also supports 16 screens of UPS configuration and setup options
•4 post installation hardware included, Optional 2POSTRMKITWM enables 2 post rack / wallmount installation, Optional 2-9USTAND enables tower placement
•Single line TEL / Network surge suppression
•Electronic bypass maintains utility output during a variety of UPS fault conditions
•Battery independent restart ensures automatic UPS power-up without user interaction after lengthy power outages, even when batteries are expired and require replacement
•Frequency regulation / conversion mode offers generator-compatible frequency correction or conversion of frequency from 50 to 60Hz or 60 to 50Hz
•Built-in USB, RS-232, contact-closure and slot for network interface card options
• Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX, SNMPWEBCARD and MODBUSCARD
•HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
• USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from www.tripplite.com/poweralert