Tripp Lite SU2200RTXLCDN SmartOnline 120V 2.2kVA 1.8kW Double-Conversion UPS, 2U Rack/Tower, Extended Run, WEBCARDLX Network Interface

• Zero transfer time suitable for advanced network applications
• 2% output voltage regulation in online and battery modes
• Expandable runtime with optional external battery packs
• Pre-installed WEBCARDLX network interface
• 12 min. runtime at half load; 4 min. at full load
• To enable the Auto Probe feature, this product requires LX firmware update 15.5.2 or later to be installed

Protects connected mission-critical equipment against damage, downtime and data loss due to blackouts, brownouts, power surges and line noise. Pre-installed WEBCARDLX network interface permits remote UPS management.
Protects Mission-Critical Rack-Mounted Equipment
•Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
•+/-2% voltage regulation in online and battery modes
•Selectable 100/110/120/127V output voltage
•6 NEMA 5-15/20R and 1 L5-20R outlets
•10-ft. (3.05 m) power cord with NEMA 5-20P input
•570-joule surge suppression rating Reliable Battery Backup with Expandable Runtime
•Supports half load for 12 min. and full load for 4 min.
•Zero transfer time suitable for advanced network applications
•Expandable runtime with optional external battery packs, such as Tripp Lite's BP48V24-2U
•Battery independent restart ensures automatic UPS power-up after lengthy power outages, even with expired batteries Pre-Installed WEBCARDLX Network Interface
•Allows full remote access for power monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH
•Optional EnviroSense2 sensors (sold separately) enable site monitoring of temperature, humidity and contact-closure status Switchable Numbered Load Banks
•Outlets are divided into 2 numbered load banks, each of which may be individually powered on and off remotely to reset or reboot connected equipment Interactive LCD Screen
•Reports detailed status information, including load, voltage and battery levels
•Offers advanced configuration and setup options, including output voltage and operating mode EMI/RFI Line Noise Filtering
•Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance Audible Alarm
•Indicates startup/shutdown, power failure, low battery, overload and fault conditions Communications Ports
•USB and DB9 ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software (available via free download at www.tripplite.com/poweralert)
•EPO port supports emergency shutdown in large facilities Versatile Installation Options
•Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack
•Mounts on wall or 2-post rack with optional 2POSTRMKITWM
•Mounts in upright tower position with optional 2-9USTAND