Tripp Lite SMART5000XFMRXL SmartPro 208 & 120V 5kVA 3.75kW Line-Interactive Sine Wave UPS, 3U, Extended Run, Network Card Options, USB, DB9

• 5kVA / 5000VA line interactive 3U rack/tower UPS; Sine wave output
• 208 & 120V output during brownouts to 167 and overvoltages to 260V
• USB, Serial, EPO & Network Management Card options
• 3U all-in-one chassis; 8 single-outlet switched load banks; 97% efficiency
• NEMA L6-30P input; 8 NEMA 5-15/20R, 2 L6-20R & 1 L6-30R outlets
• To use the Auto Probe feature, this product requires a WEBCARDLX network interface (sold separately) running LX firmware update 15.5.2 or later

Tripp Lite Cat6 RJ45 plugs can be used with Solid or Stranded conductor Cat6 wire. Included Load-Bars add to ease of termination and virtually foolproof results. Staggered Up-Down design for enhanced performance and reduction of Near End Cross-talk ( NEXT). 50 micro-inch gold contacts for durability and longevity. Polycarbonate housing, UL94-V2.

•5000VA/3750 watt max. output power capacity compatible with North American 208V/60Hz input voltage
•Supports full output at either 208V or 120V
•3U rack/tower UPS installs in standard 19 inch rack enclosures with an installed depth of only 25 inches / 63.5cm
•Protects sensitive networking equipment from blackouts, voltage fluctuations and transient surges
•Line Interactive Automatic Voltage Regulation (AVR) corrects 208V nominal input from 167 to 260VAC back to usable 208/120V levels without consuming battery power
•AVR circuits boost undervoltages by 12% and reduce overvoltages by 12%
•Network interfaces support simultaneous communications via USB, DB9 serial and slot for Network Management Card option
• Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX and SNMPWEBCARD
• USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from www.tripplite.com/poweralert
•Built-in Emergency Power Off (EPO) interface with cable
•Sine wave output in AC and battery mode
•Expandable runtime with optional BP48V60RT-3U and BP48V27-2US external battery packs
•Half/full load runtime of 20/8.5 minutes with internal batteries
• Intelligent battery management system extends battery life
•Includes 11 output receptacles (2 L6-20, 1 L6-30 & 8 NEMA 5-15/20R)
•Ships with installed L6-30P input plug, supports user supplied 50A replacement plug or hardwire input
•Integrated 8 bank switched PDU enables remote outlet management for load shedding or remote reboot of individual devices
•3 stage metered LEDs offer current monitoring and battery charge level
•Mains power and voltage regulation LEDs offer at-a-glance power status information
•Front panel switches support self-test and alarm cancel functions
•Included adjustable mounting rails support installation in 4 post 19 inch racks
•UPS ships fully assembled in full compliance with DOT regulations, no time consuming connection of internal batteries by user is required
•Supports upright tower placement with optional 2-9USTAND accessory