TA095 Single-Axis IEPE Accelerometer
The TA095 is a single-axis IEPE accelerometer that is suitable for use in a wide range of applications. It can be used with any suitable device that provides a constant-current IEPE power source, such as the PicoScope 4224 IEPE.
Kit PP697 Contains: TA095, a calibration certificate and an introductory guide.
Technical Specs:
- Sensitivity (± 15%): 10.2 mV/(m/s2)
- Measurement range: ± 490 m/s2
- Frequency range: 0.5 Hz to 10 kHz
- Non-Linearity: ± 1%
- Transverse Sensitivity: ≤ 7%
- Settling Time (within 1% of bias): ≤ 2.0 sec
- Discharge Time Constant: ≥ 0.3 sec
- Excitation Voltage: 18 to 28 VDC
- Constant Current Excitation: 2 to 20 mA
- Output Impedance: <150 Ohms
- Output Bias Voltage: 8 to 12 VDC
- Spectral Noise (10 Hz): 78.5 (micrometre/s2)/sqrtHz
- Spectral Noise (100 Hz): 49.1(micrometre/s2)/sqrtHz
- Spectral Noise (1 kHz): 39.2 (micrometre/s2)/sqrtHz
- Electrical Isolation (Case): >108 Ohms
Enviromental Specs:
- Overload Limit (Shock): 49 050 m/s2 pk
- Temperature Range: -54°C to +121°C
- Enclosure Rating: IP68
Physical Specs:
- Size (Hex x Height): 14 mm x 64 mm
- Weight (with cable): 99.3 g
- Mounting: Stud
- Mounting Thread: 1/4-28 Female
- Mounting Torque: 2.7 to 6.8 Nm
- Sensing Element: Ceramic
- Sensing Geometry: Shear
- Housing Material: Stainless Steel
- Sealing: Molded
- Electrical Connector: Molded Integral Cable
- Electrical Connection Position: Top
- Cable Length: 3 m
- Cable Type: Polyurethane
