Tripp Lite SU3000RTXL2U SmartOnline 120V 3kVA 2.7kW On-Line Double-Conversion UPS, 2U Rack/Tower, Extended Run, Network Card Option, ENERGY STAR

• Zero transfer time between AC power and battery operation
• +/-2% output voltage regulation in online and battery modes
• Expandable runtime with optional external battery packs
• Optional WEBCARDLX network interface for full remote access
• 13.8 min. runtime at half load; 4.8 min. at full load
• To use the Auto Probe feature, this product requires a WEBCARDLX network interface (sold separately) running LX firmware update 15.5.2 or later

Protects connected mission-critical equipment against damage, downtime and data loss due to blackouts, brownouts, surges and line noise. Converts incoming AC power to filtered DC power, then back to AC with a pure sine wave.
Protects Mission-Critical Rack-Mounted Equipment
•Protects equipment against data loss, downtime and damage due to power outages, voltage fluctuations and transient surges
•+/-2% voltage regulation in online and battery modes
•Selectable 120V 50/60 Hz output voltage with up to 0.9 power factor
•6 breakered NEMA 5-15/20R and 1 non-breakered L5-30R outlets
•10-ft. (3.05 m) AC power cord with NEMA L5-30P input plug
•504-joule surge protection rating for shielding connected devices from damaging power surges and spikes Reliable Battery Backup with Expandable Runtime
•Supports half load for 13.8 min. and full load for 4.8 min.
•Zero transfer time between AC power and battery operation keeps network running during blackouts
•Expandable runtime with optional external battery packs, such as Tripp Lite's BP72V15-2U ENERGY STAR Version 2.0 Certification
•High efficiency operation and low BTU heat output reduces energy costs and meets strict EPA guidelines Switchable Breakered Load Banks
•NEMA 5-15/20R outlets divided into 2 numbered load banks, each of which may be individually powered on and off remotely to reset or reboot connected equipment Front LED Panel
•14 LEDs indicate line power, online mode, economy/bypass mode, on-battery, overload, battery condition and fault status information
•Rotates for viewing in rack and tower formats Audible Alarm
•Indicates power failure, overload, battery condition and EPO operation Communications Ports
•USB and DB9 ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software (available via free download at www.tripplite.com/poweralert)
•Optional WEBCARDLX allows full remote access for power monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH Versatile Installation Options
•Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack
•Mounts in 2-post rack with optional 2POSTRMKITWM
•Mounts in upright tower position with optional 2-9USTAND