Tripp Lite SU1500RTXL2UN SmartOnline 120V 1.5kVA 1.2kW Double-Conversion UPS, 2U Rack/Tower, Extended Run, Pre-installed WEBCARDLX Network Interface, USB, DB9 Serial

• 1500VA / 1.5kVA / 1200 watt on-line double-conversion 2U rack/tower UPS
• 120V +/-2% output at 50/60Hz, High 95% efficiency economy mode option
• Expandable runtime, Hot-swap batteries; 19 in / 48.3cm installed depth
• USB, RS232, EPO and pre-installed WEBCARDLX Network Interface
• Front panel status LEDs with detailed load and battery metering
• 2 independently switchable output load banks
• NEMA 5-15P input; 5-15R outlets
• To enable the Auto Probe feature, this product requires LX firmware update 15.5.2 or later to be installed

Tripp Lite Smart Online UPS systems offer high performance power protection ideal for critical server and network equipment in datacenters, computer rooms and network closets. Online, double-conversion Uninterruptible Power Supply (UPS) maintains perfectly regulated output power by continuously converting raw AC input to DC, then re-converting output back to AC. Fully regulated sine wave AC output with +/-2% voltage regulation powers network equipment continuously, even during severe brownouts and overvoltages, all without depleting UPS battery reserves. Maintains battery-derived AC output during power failures with zero transfer time. Extended runtime options available. High 95% efficient operation in optional economy mode saves BTU heat output and energy costs. Network management interfaces support communications via USB port, DB9 serial port and pre-installed WEBCARDLX network management interface card. The Java-free HTML5-based WEBCARDLX interface enables full remote access for site power and UPS status monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP. Built-in DB9 port offers both enhanced RS-232 data and basic contact closure monitoring ability. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. PowerAlert UPS monitoring software is available via free download. Emergency Power Off (EPO) interface. LED display reports UPS operating mode, line power availability, battery mode operation, inverter operation and output power availability. Audible alarm with push-button momentary alarm-cancel. Programmable self-test. Fault-tolerant auto-bypass mode. Field-replaceable, hot-swappable internal batteries and external battery packs.

SmartOnline 120V 1.5kVA 1.2kW Double-Conversion UPS, 2U Rack/Tower, Extended Run, Pre-installed WEBCARDLX Network Interface, USB, DB9 Serial

•Tripp Lite SU1500RTXL2UN 1500VA / 1.5kVA / 1200W on-line, double-conversion 2U rackmount UPS
•120V output (120V factory preset)
•NEMA 5-15P input, 6 NEMA 5-15R
•Two switched load banks support remote reboot or programmable load shedding options
•Supports 2% output voltage regulation and zero transfer time in double conversion mode
•Economy mode option offers enhanced 95% efficiency operation, reduced power consumption and lower BTU emissions
•14 minutes runtime at 50% load (600W) and 5 minutes at 100% load (1200W) with internal batteries
•BP48V24-2U (limit 1), BP48V60RT-3U (multi-pack compatible) and BP48V27-2US (multi-pack compatible) external battery packs available (some configurations require Tripp Lite's External Battery Configuration Software)
•Intelligent battery management system extends battery life
•LED Display reports UPS operating mode, line power availability, battery mode operation, inverter status and output power availability
•Audible alarm with push-button momentary alarm-cancel
•4 post installation hardware included, Optional 2POSTRMKITWM enables 2 post rack installation
•Single line TEL / Network surge suppression
•Electronic bypass maintains utility output during a variety of UPS fault conditions
•Network interfaces support communications via built-in USB, DB9 serial / contact-closure and pre-installed WEBCARDLX network management card
•WEBCARDLX interface allows full remote access for power monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH
•Optional E2 sensors enable site monitoring of temperature, humidity and contact-closure status
•Reduce Service Calls with Auto Probe Autonomous Device Management . Auto Probe feature (Firmware 15.5.2 and greater) of the LX Platform Interface checks the connectivity status of any networked device and automatically takes one or more user-configured actions if the device fails to respond; actions include outlet reboot, set SNMP traps, SNMP OID sets, and even script execution when used in conjunction with the Tripp Lite PowerAlert Network Shutdown Agent (PANSA)
•HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
•USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from www.tripplite.com/poweralert