Tripp Lite SM2200RMDVTAA TAA SmartPro 120V 2.2kVA 1.92kW Line-Interactive Sine Wave UPS, 3U, 120/230V input, Network Card Options, USB, DB9

product id: 101678

Category: Electronic Production Supplies, Power Management

Manufacturer: Tripp Lite

InstruHub is a leading supplier and reseller of Tripp Lite Electronic Production Supplies, Power Management in DRC, and we ship to all major cities such as Kinshasa


  • Federal Trade Agreements Act / TAA Compliant for GSA Schedule purchases
  • 2200VA / 2.2kVA / 1920W line interactive 3U rack/tower UPS; 0.9 power factor
  • Maintains 120V output with 120V or 230V input, Sine wave output
  • USB port, RS232, EPO and optional network management card slot; Detailed status LEDs
  • 95% line-mode efficiency, 2 switched load banks
  • C20 inlet & 4 international input line cords, 4 5-15R & 4 5-15/20R outlets
  • To use the Auto Probe feature, this product requires a WEBCARDLX network interface (sold separately) running LX firmware update 15.5.2 or later

Tripp Lite's dual-voltage SMART700DV line-interactive UPS system maintains 120V nominal output when fed with North American 120V or international 230V input voltage. Protects servers, networking accessories and telecommunications equipment from blackouts, voltage fluctuations and transient surges. Large internal batteries offer 54.5 min. half-load runtime and 22.2 min. full load runtime during power failures. 700VA/450W power handling capability supports a variety of networking, telecom and other applications, including multiple network workstations. Includes 6 UPS-supported outlets. Supports remote monitoring of UPS and site power conditions via built-in USB and RS-232 enabled DB9 ports. Works with PowerAlert UPS monitoring and unattended shutdown software available via free download. Includes complete USB and serial cabling. Built-in audible alarm and 5 front panel LEDs indicate status of line power, battery power, battery low/replace, voltage regulation and load level. Network-grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges.

•SmartPro SM2200RMDVTAA dual-voltage line interactive UPS system maintains 120V nominal output with either 120V or 230V input power
•Ideal for voice, data and networking applications requiring 120V output from worldwide power sources
•Line interactive Automatic Voltage Regulation (AVR) offers voltage boost during brownouts and voltage cut during overvoltages
•Maintains continuous operation through blackouts, voltage fluctuations and surges
•Corrects line voltage conditions between 89 to 148V or 212 to 286V to 120V nominal output
•Standard internal battery set offers 30 minutes runtime at half load (960 watts) and 12 minutes at full load (1920 watts)
•Extended runtime is available with optional BP48V24-2U / BP48V242UTAA (limit 1) OR BP48V60RT3U / BP48V60RT3UTAA (no limit)
•Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual)
•Following an extended power outage, the UPS will automatically restart into line-power mode, begin powering connected equipment and recharge the battery system, all without user interaction
•Includes C20 power inlet with set of 4 international cord sets to support 5-20P, Schuko, CEE 7 / EU1-16P, British BS1363A and Italian CEI 23-16 plug types
•Includes NEMA 5-15R and 5-15/20R output receptacles
•Network-grade AC surge and noise suppression
• Compatible with Tripp Lite UPS management card options WEBCARDLX and SNMPWEBCARD
• USB and DB9 ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from www.tripplite.com/poweralert
•HID-compliant USB port enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
•Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces
•Emergency Power Off (EPO) interface
•Integrated 2-bank PDU switching supports load shedding and remote-reboot of connected equipment. 3-stage metered current monitoring and battery charge status LEDs
•95% efficiency in line power mode reduces energy cost and BTU emissions
•Utility power and voltage regulation LEDs
•Installation accessories for rackmount and upright tower form factors included
•Field-replaceable, hot-swappable internal batteries and external battery packs

Includes SM2200RMDVTAA UPS system, 5 international input power cables, USB, DB9, EPO cabling, 2-9USTAND tower stand kit, 2POSTRMKITHD two-post rackmount kit, 4POSTRAILKIT, Owner's manual
Note Includes/Contains Batteries
Warranty Information 2-year limited warranty

Why Buy from InstruHub:




Similar products

call
phone whatsApp mail