Tripp Lite SMART1000RM1UN SmartPro 120V 1kVA 800W Line-Interactive Sine Wave UPS, 1U Rack/Vertical, WEBCARDLX Network Interface, USB, DB9, 6 Outlets

• Corrects under- and overvoltages from 83V to 147V
• 6 NEMA 5-15R outlets—2 switchable via network interface
• Network power management and control capability
• Pre-installed WEBCARDLX network interface
• 14 min. runtime at half load; 4 min. at full load
• To enable the Auto Probe feature, this product requires LX firmware update 15.5.2 or later to be installed

Protects connected mission-critical equipment against damage, downtime and data loss due to blackouts, brownouts, power surges and line noise. Pre-installed WEBCARDLX network interface permits remote UPS management.
Protects Mission-Critical Rack-Mounted Equipment
•Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
•Audible alarm signals loss of utility power, overload and low battery
•6 NEMA 5-15R outlets
•10-ft. (3.05 m) power cord with 120V NEMA 5-15P input
•450-joule surge suppression rating Reliable Battery Backup
•Supports half load up to 14 min. and full load up to 4 min.
•Internal batteries designed for hot-swap field replacement Pre-Installed WEBCARDLX Network Interface
•Allows full remote access for power monitoring, configuration, control and email notifications via secure web browser, SNMP, Telnet, SSH, and CLI.
•Optional E2 sensors (sold separately) enable site monitoring of temperature, humidity and contact-closure status Reduce Service Calls with Auto Probe Autonomous Device Management
•Auto Probe feature (Firmware 15.5.2 and greater) of the LX Platform Interface checks the connectivity status of any networked device and automatically takes one or more user-configured actions if the device fails to respond; actions include outlet reboot, set SNMP traps, SNMP OID sets, and even script execution when used in conjunction with the Tripp Lite PowerAlert Network Shutdown Agent (PANSA) Switchable Outlets
•2 load banks, each with one outlet controllable remotely to reboot equipment or shed nonessential loads Automatic Voltage Regulation (AVR)
•Maintains 120V nominal output over input range of 83V-147V without using battery power EMI/RFI Line Noise Filtering
•Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance LED Indicators
•Front-panel LEDs signal power, voltage correction, load level and battery charge state Communications Ports
•USB and DB9 ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software (available via free download at www.tripplite.com/poweralert)
•EPO port supports emergency shutdown in large facilities Versatile Installation Options
•Hardware included for mounting in 1U of EIA-standard 19 in. 2- or 4-post rack
•Optional 4POSTRAILKIT1U accessory available for extra support in 4-post installations
•Compatible with vertical mount cabinets