Tripp Lite PDU3XVSR6G20 11.5kW 3-Phase Switched PDU, 208-240V Outlets (24 C13, 6 C19), IEC309 16/20A Red, 360-415V Input, 0U, TAA

• Switched 11.5kW 3-Phase 360-415V input 208-240V output PDU
• Reports voltage, frequency & load per-outlet and per phase via ethernet interface
• 1% billing-grade accuracy; Digital display reports detailed status and loading information
• 70in / 1778mm 0U vertical format; Toolless button-mount installation
• 24 C13 & 6 C19 single phase outlets; Plug-lock cable retention inserts keep power cables secure
• IEC309 16/20A Red (3P+N+E) 3 phase input; 6-ft. (1.83 m) line cord
• TAA Compliant

•11.5kW Switched 360-415V input 208-240V output PDU with built-in web/network interface
•IEC309 16/20A Red (3P+N+E) 360-415V 3 phase input with 6 ft. / 1.8m line cord
•0U, 70 inch / 178cm vertical form factor
•30 switched 208-240V outlets (24 C13, 6 C19) in 3 single phase load banks
•Supports power-on, power-off or reboot of each outlet on a real-time or programmable basis
•Enables reboot of locked equipment, custom power-on/power-off sequences, load shedding of optional loads and disabling unused outlets
•Network interface provides PDU control and data regarding input voltage and load levels per-outlet and per-phase
•Built-in local digital display and remote web/network interface reports detailed voltage, amperage and kilowatt output values per outlet and per phase with additional reporting options for power unbalance percentage, IP address and sensor based temperature and humidity data (requires ENVIROSENSE sensor)
•In-rack environmental reporting with optional ENVIROSENSE temperature / humidity sensor and rack access notification with up to 4 optional SRSWITCH door sensors
•Local display supports electronic 180 degree display rotation for overhead or under-floor input cable orientation
•Supports user-specified alarm notification thresholds
•DHCP/Manual configuration support
•10/100 Mbps auto-sensing
•Real-time clock backup maintains the time of day and date even if the PDU is unpowered
•Tiered access privileges allow an administrator and a guest to login via web browser
•Alert notifications via email or SNMP traps offer immediate event notification
•Firmware upgrade ability supports future product enhancements
•Supports HTTP, HTTPS, PowerAlert Network Management System, SMTP, SNMPv1, SNMPv2, SNMPv3, Telnet, SSH, FTPP, DHCP, BootP, NTP protocols
•Fully compatible with FREE PowerAlert Network Management System / NMS Software
•Included set of Plug-lock inserts keep C14 and C20 power cords solidly connected to PDU outlets
•Toolless mounting supported in button-mount compatible racks, plus nut-and-bolt mounting brackets for other mounting applications (set of 2 9mm buttons pre-installed, 2 9mm and 4 6mm spare buttons included)
•Federal Trade Agreements Act / TAA Compliant for GSA Schedule purchases