N9916B FieldFox Handheld Microwave Analyzer, 14 GHz
Features:
- N9916B – 14 GHz FieldFox Microwave Analyzer
- Base model includes cable and antenna analyzer
- Expand capabilities with optional vector network analyzer, spectrum analyzer, real-time spectrum analyzer, and more
- Capture intermittent signals with 100 MHz gap-free real-time bandwidth
- Simultaneously measure all four S-parameters with 115 dB system dynamic range
- Make accurate spectrum analyzer measurements (±0.3 dB) without warm-up
- Validate network performance with over-the-air measurements for 5GTF and LTE
- GPS/GNSS receiver for geolocation and time stamp precision
- Lightest all-in-one analyzer at only 7.35 lb. (3.34 kg)
- New high capacity battery providing over 5 hours of battery life
FieldFox, the industry’s most versatile portable analyzer, has launched this new line of future-ready analyzers to address the ever-increasing demands of 5G, satellite communications, signal monitoring and electronic warfare applications. All existing FieldFox A Series measurement capabilities (except QuickCal) are supported on the new FieldFox B Series. 100 MHz (Option B10) and 40 MHz (Option B04) analysis bandwidth options will be available on the B models, with 10 MHz as the standard option.
- Up to 100 MHz of analysis bandwidth, I/Q capture and real-time bandwidth, wideband IF output
- 10 dB improved DANL over previous generation FieldFox, up to 15 dB better in some bands
- Greater than 115 dB VNA system dynamic range
- New high output power source >8 dBm in some bands
- 10 dB improved phase noise over previous generation FieldFox
- 5G NR and LTE-A demodulation with 89600 VSA software (Optional)
- Over-the-Air (OTA) measurements for 5G TF and LTE FDD (Optional)
- Supports record and playback of I/Q capture that can be analyzed with custom I/Q open architecture solutions (Optional)
- Multi-GNSS (Global Navigation Satellite System) support for geolocation and time stamping: GPS+SBAS, GLONASS, BDS, Galileo (Optional)
- Frequency range: DC to 6 GHz
- Input power: +25 dBm max
- Source match: ≥ 35 dB
- Directivity: ≥ 42 dB
- Impendence: 50 Ω
Open specifications
- Female offset length: 21.287 mm
- Phase tolerance: 1.25 degrees
- RL: ≤ 0.10 dB
Load specifications
- DC resistance: 50 Ω ± 0.5 Ω
- RL: ≥ 42 dB
Short specifications
- Female offset length: 21.287 mm
- Phase tolerance: 0.85 degrees
- RL: ≤ 0.10 dB
A 4 GHz 7/16 interface T-calibrations kits with open/short/load design for use on-site and for factory production testing.
